Safety And Protection - Corsair SF L Series Manual

CONGRATULATIONS ON THE PURCHASE OF YOUR
NEW CORSAIR SF-L SERIES POWER SUPPLY!
CORSAIR SF-L Series fully modular power supplies deliver reliable 80 PLUS Gold efficient power to your system.

SAFETY AND PROTECTION

• Over-Voltage Protection (OVP)
Over-voltage protection for the 12V DC outputs is required to comply with the ATX/SFX12V specification. OVP
shuts down the PSU in the event that the DC outputs exceed a set level, determined by the PSU manufacturer.
• Over-Current Protection (OCP)
OCP ensures that the output of the DC voltage rails remains within safe operating limits.
• Over-Temperature Protection (OTP)
OTP ensures that the PSU will shut down when the internal temperature reaches a set point. This is usually as
a result of internal current overloading or a fan failure.
• Short-Circuit Protection (SCP)
A short-circuit is defined as any output impedance of less than 0.1 ohms. Amongst other things, SCP ensures
that the PSU shuts down should the power supply suffer a short circuit. It also ensures that no damage should
occur to the unit, or your PC's components in the event of a short.
• Over Power Protection (OPP)
Over power protection shuts off the PSU when the power drawn is between 115% and 135% of the rated power.
• Catastrophic Failure Protection (CFP)
PSU must have protection circuitry to shut down safely to prevent damage from any catastrophic failures such
as flame, excessive smoke, charred PCB, fused PCB conductor, startling noise, emission of molten material, etc.
ENGLISH ENGLISH
TABLE OF CONTENTS TABLE OF CONTENTS
SF850L SF850L
SF1000L SF1000L
INSTALLATION INSTALLATION