Coolmax CTG-750 User Manual

Coolmax CTG-750 User Manual

Coolmax ctg-750 power supply: user guide

Advertisement

1
2
3
..............................................................
4
5
6
Table of Content
...................................................
........................................... ...............
..........................................................
...................................................
....................................................
1
1
1
4
5
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CTG-750 and is the answer not in the manual?

Questions and answers

Summary of Contents for Coolmax CTG-750

  • Page 1 Function Description ..How to Setup Specifications Precaution Simple Maintainance Mechanical Diagram Table of Content...
  • Page 2 High efficiency : not less than 75% at full load 2. How to Setup It is rather simple to install this power supply to your precious computer tower. Follow the steps below to finish the setup. Step1:Open the computer tower cover; put the power supply into the corresponding location of the tower, and then use right screws to fix the power supply to tower.
  • Page 3 APE-1100X (CTG-1000) 3.4 Protection The power supply itself is designed with short circuit, over voltage, over power and over current protection functions described as below: 3.4.1 Short Circuit Protection A short circuit on any DC output will cause the power to latch. The power supply will withstand a continuous short circuit to the output without damage or overseers to the unit.
  • Page 4 5V conditions so that no damage can occur to the power supply. All outputs shall be protected so that on damage occurs to the power supply under shorted output condition.
  • Page 5 Operation Storage No degradation of the power supply shall occur during shipping or storage at the specified condition. 3.6 Regulatory Compliance Our power supply has been certified to comply with multi-national Safety and EMI.
  • Page 6 If power supply cannot work properly, before send for repair, please check the following items: 5.1 Does power cord indeed plug into electrical outlet? 5.2 Does Input Voltage set in power supply correspond to the main source in your environment? 5.3 Please check the output connectors plugging in proper direction and connecting firmly.
  • Page 7 114.0 6-#32(4x) 144.0 86.0 150.0...

This manual is also suitable for:

Ape-900xApe-1000xApe-1100xCtg-850Ctg-1000

Table of Contents