Mounting Instructions; Vacuum Attachment Instructions - Weston ARROWSAW 52-0601-W Manual

MOUNTING INSTRUCTIONS

For best results, mount the Arrowsaw to a solid, level surface to prevent
excess vibration and movement during use. There are two holes in the Base
for this purpose (FIGURE 1).
As an alternative, c-clamps (Not Included) may be used.

VACUUM ATTACHMENT INSTRUCTIONS

w WARNING
The Arrowsaw comes with two Dust Collector
Adapters. Use the appropriate size Dust
Collector Adapter for the vacuum hose you
want to connect.
1. Set the "ON-OFF" Switch to the "OFF"
position.
2. Unplug the Power Cord from the power
source.
. If you are using the Small Dust
3.
Collector Adapter, connect the large
end to the Dust Collector (FIGURE 2).
. If you are using the Large Dust
Collector Adapter, connect the small
end to the Dust Collector.
4. Firmly insert the vacuum hose end into the
open end of the Dust Collector Adapter.
5. Make sure all connections between
the Arrowsaw, Dust Collector Adapter and
vacuum hose are secure.
6
Mounting Holes
Electrical Shock Hazard. Before cleaning, assembling, or
disassembling the appliance, make sure the appliance is
OFF( ) and the plug is removed from the outlet/power source.
Dust Dust
Vacuum
Collector Collector
Hose
Adaptor
FIGURE 1
FIGURE 2