Using The Presentation Tools - Sharp XG-NV51XM Operation Manual

Using the
VOL
ON
MUTE
OFF
BLACK
SCREEN LASER
TOOLS MENU
R-CLICK ENTER
INPUT IrCOM
FREEZE AUTO SYNC
On-screen Display
Menu Window
Red Green Blue
ON VOL
MUTE
OFF
BLACK
SCREEN LASER
TOOLS MENU
R-CLICK ENTER
INPUT IrCOM
FREEZE AUTO SYNC
When selecting Sharp default image
35
Presentation Tools
2
3, 5
4, 6
Yellow Orange White Black
2
3, 5
4
This projector is equipped with presentation tools, which
can be accessed from the "Power" remote control.
These will help you emphasise keypoints within your
presentation.
7
1 Slide the MOUSE/ADJUSTMENT switch to the
ADJ. position.
2 Press TOOLS to display the presentation tools
menu window on the screen.
3 Press ∂/ƒ/ß/© to select the desired tool and
colour.
4 Press ENTER to select it.
5 Once the tool is displayed on the screen, press
∂/ƒ/ß/© to move it around the screen.
6 Press ENTER to stamp the tool on the screen.
7 Use LEFT-CLICK to individually delete tools
stamped on the screen.
• You can stamp each tool as many times as you want on the
screen.
• To clear all the stamped presentation tools on the screen,
press ∂/ƒ/ß/© to select " " and ENTER.
Displaying the break time
1 Slide the MOUSE/ADJUSTMENT switch to the
ADJ. position.
2 Press TOOLS to display the presentation tools
menu window on the screen.
3 Press ∂/ƒ/ß/© to select " " in the menu
window.
4 Press ENTER to start counting down the break
time.
5 Press ∂ to increase or ƒ to decrease the break
time.
• The break time is displayed against the background image
selected in "Selecting a Startup Image". (See page 33.)
MOUSE ADJ.
MOUSE ADJ.