Connecting The Projector; Connecting The Projector To A Computer - Sharp XG-NV51XM Operation Manual

Connecting the Projector

Connecting the Projector to a Computer

You can connect your projector to a computer for projection of full colour computer images. See the next page for
details on the connections.
CAUTION
• Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.
• Please read the computer's operation manual carefully.
• Refer to page 43 "Input Signals (Recommended Timing)" for a list of computer signals compatible with the projector. Use with computer
signals other than those listed may cause some of the functions not to work.
Computer
Computer audio cable (3.5 mm stereo minijack cable, supplied)
• The arrows (→, ↔) indicate the direction of the signals.
• When connecting to a Macintosh computer, use the supplied Macintosh adaptor.
15
Mouse control cable for
Mac (supplied)
Mouse control cable for IBM PS/2 (supplied)
Macintosh adaptor
(supplied)
Computer cable (supplied)
RS-232C cable (cross type, sold separately)
Mouse control serial cable
(supplied)
Remote mouse receiver (supplied)
Use this terminal to con-
nect the supplied mouse
control cable to the remote
mouse receiver.
Rear terminals