Computer Image Adjustments - Sharp XG-NV51XM Operation Manual

Computer Image Adjustments

Projector
1, 5
2, 3, 4
(GUI) On-Screen Display
2
3
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
VOL
ON
occur between the LCD pixels, causing flickering,
MUTE
vertical stripes, or contrast irregularities in portions of
OFF
the screen. Should this occur, adjust "Clock", "Phase",
BLACK
SCREEN LASER
TOOLS MENU
"H-Pos" and "V-Pos" for optimum computer image.
Description of Adjustment Items
Selected item
R-CLICK ENTER
Clock
INPUT IrCOM
Phase
H-Pos
FREEZE AUTO SYNC
V-Pos
• Computer image adjustment can be made easily by
pressing AUTO SYNC (
remote control. See the next page for details.
Select the desired computer input mode with INPUT
(
on the projector or the "Power" remote control.)
(For use with the "Power" remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU. Menu bar and "Picture" menu
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the
5 To exit from the GUI, press MENU.
• To reset all adjustment items, select "Reset" on the "Fine
Sync" menu screen and press ENTER.
Description
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centres the on-screen image by moving it to the left or right.
Centres the on-screen image by moving it up or down.
) on the projector or the "Power"
screen appear. GUI Operation guide is also
displayed.
adjustment item to the desired setting.
MOUSE ADJ.
mark of the selected
26