Table of Contents
Advertisement
Checking the Input Signal and Lamp Usage Time
Projector
1, 4
2, 3
(GUI) On-screen Display
Setting a
Background
Projector
1, 6
2, 3, 4
5
(GUI) On-screen Display
This function allows you to check the current input signal
information and accumulated lamp usage time.
ON
VOL
MUTE
(For use with the "Power" remote control, slide the
OFF
MOUSE/ADJUSTMENT switch to the ADJ. position.)
BLACK
SCREEN
LASER
1 Press MENU.
TOOLS
MENU
2 Press ß/© to select "Options". The lamp usage
3 Press ∂/ƒ to select "Signal" to display the
R-CLICK
ENTER
4 To exit from the GUI, press MENU.
INPUT
IrCOM
FREEZE
AUTO SYNC
• It is recommended that the lamp be replaced after
1,400 hours of usage. At this point, take the projector to
your nearest Authorised Sharp Industrial LCD Products
Dealer or Service Centre to have the lamp replaced. See
page 38 for details.
• In VIDEO mode, the resolution and frequency settings will
not be displayed.
Image
This function allows you to select the image displayed
when no signal is being sent to the projector.
VOL
ON
MUTE
Description of Background Images
OFF
BLACK
SCREEN
LASER
TOOLS
MENU
Selected item
Sharp
Custom
Blue
R-CLICK
ENTER
None
INPUT
IrCOM
(For use with the "Power" remote control, slide the
FREEZE
AUTO SYNC
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options".
3 Press ∂/ƒ to select "Background", and then press
4 Press ∂/ƒ to select the background image you want
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• By selecting "Custom", the projector can display a custom
image (i.e. your company logo) as the background image.
Custom image must be 256 colour BMP. Please see the
Sharp Advanced Presentation Software's operation manual
for how to save (or change) a custom image.
time will be displayed.
current input signal.
Background image
SHARP default image
User customised image (i.e. company logo)
Blue screen
Black screen
©.
to display on the screen.
MOUSE
ADJ.
MOUSE
ADJ.
32
Advertisement
Table of Contents
