Epson PowerLite EB-L520U User Manual page 239

Setting
Image Shift (PowerLite EB-
L630SU/EB-L635SU)
Remote Receiver
Screen Type
Screen Position
High Altitude Mode
Source
Blanking
Reset to Defaults
Options
Varying positions available
Front/Rear
Front
Rear
Off
4:3
16:6
16:9
16:10
Varying positions available
On
Off
—
Top
Bottom
Left
Right
—
239
Description
Adjusts the position of the projected
image
Limits reception of remote control
signals by the selected receiver; Off
turns off all receivers
Sets the aspect ratio to fit the image
on the projection surface; not
available in Content Playback mode
Shifts the image position on the
screen (only available if the Screen
Type setting is not set to the same
aspect ratio as the projector's native
resolution)
Regulates the projector's operating
temperature at altitudes above 4921
feet (1500 m)
Displays settings saved for each
input source
Hides an area of the projected
image that you select (setting only
displayed when Content Playback
is Off)
Resets all settings for the current
input source (setting only displayed
when Content Playback is Off)