Epson PowerLite EB-L520U User Manual page 201

4. Turn on the Edge Blending, Line Guide, and Pattern Guide settings.
Note: Select a different Guide Color setting for each projector so that you can see the blended area
clearly.
5. Select the edge you want to blend on each projector and press
You see a screen like this:
6. Select the Blending setting and select On.
7. Press Esc to return to the previous screen.
8. Select the Blend Start Position setting and adjust the point where edge blending begins.
Note: If you created a unified image area using the Edge Blending feature, set the Blend Start
Position setting to 0.
9. Select the Blend Range setting and use the arrow buttons to select the width of the blended area so
that the displayed guides are at the edges of the overlapping area between the two images.
10. Press Esc to go back to the previous screen.
Enter.
201