Table of Contents
Advertisement
Available languages
Available languages
Quick Links
V 2.1
Please read and understand all instructions before use.
SPECIFICATIONS
Indicator Range
Display Diameter
Voltage Rating
Material
SAFETY
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator
must follow basic precautions to reduce the risk of personal injury and/or damage to the
equipment. Before allowing someone else to use this tool, make sure they are aware of all
safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. Common sense and
caution are factors that cannot be built into this product, but must be supplied by the
operator.
NOTE: Keep this manual for safety warnings, precautions, operating, inspection and
maintenance instructions.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit.
2. Do not use in the presence of flammable gases or liquids.
3. Keep anyone not wearing the appropriate safety equipment away from the work area.
2 in. LED
Vacuum/Boost
Gauge
User Manual
-30 in. Hg to +30 PSI
2 in.
12V
Aluminum housing
8238438
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Power Fist 8238438
Summary of Contents for Power Fist 8238438
- Page 1 V 2.1 8238438 2 in. LED Vacuum/Boost Gauge User Manual Please read and understand all instructions before use. SPECIFICATIONS Indicator Range -30 in. Hg to +30 PSI Display Diameter 2 in. Voltage Rating Material Aluminum housing SAFETY IMPORTANT SAFETY PRECAUTIONS WARNING! Read and understand all instructions before using this tool.
-
Page 2: Personal Safety
V 2.1 2 in. LED Vacuum/Boost Gauge 8238438 PERSONAL SAFETY CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or American National Standards Institute (ANSI) when using the tool. 1. Head Protection Always wear impact safety goggles that provide front and side protection for the eyes. -
Page 3: Installation
V 2.1 2 in. LED Vacuum/Boost Gauge 8238438 INSTALLATION NOTE: When this manual refers to a part number, it refers to the included parts list. 1. Using Fig. 1 as a guide, connect adapter fitting (#2) to vacuum/boost gauge (#1). Do not overtighten. -
Page 4: Troubleshooting
V 2.1 2 in. LED Vacuum/Boost Gauge 8238438 TROUBLE SHOOTING If the tool does not function properly or if it is missing parts, contact Princess Auto Ltd. for a solution. If unable to do so, have a qualified technician service the tool. -
Page 5: Spécifications
V 2,1 8238438 Manomètre à dépression/ suralimentation DÉL de 2 po Manuel d'utilisateur Vous devez lire et comprendre toutes les instructions avant d'utiliser l'appareil. SPÉCIFICATIONS Plage de l’indicateur -30 po Hg à +30 lb/po carré Diamètre de l’affichage 2 po... -
Page 6: Sécurité Personnelle
V 2,1 Manomètre à dépression/suralimentation DÉL de 2 po 8238438 SÉCURITÉ PERSONNELLE ATTENTION ! Portez de l’équipement de protection homologué par l’Association canadienne de normalisation (CSA) ou l’American National Standards Institute (ANSI) quand vous utilisez l’outil. 1. Protection de la tête Portez toujours des lunettes antiprojections qui offrent une protection frontale et latérale pour les yeux. - Page 7 V 2,1 Manomètre à dépression/suralimentation DÉL de 2 po 8238438 INSTALLATION REMARQUE : Lorsque ce manuel fait référence à un numéro de pièce, il fait référence à la liste de pièces comprise. 1. En utilisant la figure 1 comme guide, connectez le raccord d’adaptateur (n 2) au manomètre à...
-
Page 8: Dépannage
V 2,1 Manomètre à dépression/suralimentation DÉL de 2 po 8238438 DÉPANNAGE Si l’outil ne fonctionne pas correctement ou si des pièces sont manquantes, veuillez contacter Princess Auto Ltd. afin de trouver une solution. Si ce n’est pas possible, demandez à un technicien qualifié...
Need help?
Do you have a question about the 8238438 and is the answer not in the manual?
Questions and answers