Li-Ion Battery - Shark Rocket IX140 Owner's Manual

Your vacuum comes equipped with either a standard wand or a MultiFLEX® wand and either a standard floor
nozzle or a Dirt Engage™ floor nozzle. All versions assemble the same way.
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
For proper operation, ensure all components are completely connected and clicked into place.
Handheld
Vacuum
2.
Standard
Wand
1.
Standard
Floor Nozzle
NOTE: Your vacuum's model and serial numbers can be found on the QR code label on the bottom of the back of the
handheld vacuum.
s h a r kc l e a n . c o m
ASSEMBLY
Handheld
Vacuum
2.
MultiFLEX
OR
Wand
1.
Dirt Engage
OR
Floor Nozzle

LI-ION BATTERY

Prior to first use, charge completely. A full charge takes approximately 3 hours..
RUNTIMES PER FULLY-CHARGED BATTERY
Visit sharkclean.com/support online or review the included Quick Start Guide.
LED BATTERY POWER AND CHARGING INDICATORS
RECYCLING THE LI-ION BATTERY
When the Shark Li-Ion battery needs to be replaced, dispose of it or recycle it in accordance with local
ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a
municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for
recycling. Contact your local recycling center for information on where to drop off the spent battery.
NOTE: The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.
Charging
Low Mid
Charge Charge
Nearly Full
Full Charge
NOTE: Full charge takes approximately 3 hours.
In Use
Full Mid Low
Charge Charge Charge
Nearly No
Empty Charge
s h a r kc l e a n . c o m