BIOS LIVING SC427 Instruction Manual

Introduction

Thank you for purchasing the BIOS Living Digital Analog Scale. This scale was developed with state-of-the-art electronics. This precision
device has a weight capacity of 396 lbs / 180 kg and is equipped with an auto power ON / OFF function and auto zero reset.

Features

• Digital and analog displays
• Blue backlight display
• Reminder alarm
• Accurate up to 396 lbs / 180 kg

Battery Installation

1. On the base of the scale, gently remove the battery cover.
2. Insert 3 x AAA batteries into the compartment observing the polarity markings. The LCD display will
turn on for 5 seconds then turn off. (See Figure 1).
3. After inserting the batteries, replace the battery cover.
4. Tap the center of the scale once to turn the scale on. The scale will go into calibration mode. Once
the calibration test is complete you will see
NOTE: Please be aware that inserting the batteries according to incorrect polarity
may cause permanent damage.

Unit Conversion

To change the unit LB / KG, switch the button located on the bottom of the scale.
(See Figure 2).

Using your Scale

1. Place the scale on a solid, level surface.
2. Gently step onto to the scale and the unit will automatically turn on. Once a steady reading is taken, the display will flash 3 times and
will display the weight.
3. The weight will stay on the screen for 5 seconds once you have stepped off the scale and then power off.
NOTE: If the scale is placed on a soft surface such as a carpet or an uneven floor, the results may be inaccurate
or an error message may occur.
• Auto ON / OFF
• Low battery and overload indicator
• Batteries included
• 5 year warranty
on the display.
Digital Analog Scale Digital Analog Scale
Instruction Manual
SC427 SC427
AAA AAA
Figure 1
Kg/lb
Figure 2