Download Print this page
BIOS LIVING SC428 Instruction Manual

BIOS LIVING SC428 Instruction Manual

Metallic digital scale gold/silver

Advertisement

Quick Links

Introduction
Thank you for purchasing the BIOS Living Metallic Digital Scale. This scale was developed with state-of-the-art electronics. This precision device has a
weight capacity of 400 lbs / 180 kg and is equipped with an auto power ON / OFF function and auto zero reset.
Features
• Auto ON / OFF
• Auto zero reset
To Insert or Replace Battery
• LB / KG switchable
Battery Installation (batteries not included)
1. On the base of the scale, gently remove
the battery cover as per the arrow direction.
Operation
NOTE: Please be aware that inserting the batteries according to incorrect polarity may cause permanent damage.
Using Your Scale
1. Place the scale on a solid, level surface.
NOTE: If the scale is placed on a soft surface,
lb
such as a carpet or an uneven floor, the
results may be inaccurate or an error
message may occur.
1 4 6. 8
To Insert or Replace Batte
• Low battery / over-load indication
• Accurate to 400 lbs / 180 kg
• 5 year warranty
Operation
2. Insert 4 x AAA batteries into the compartment
observing the polarity markings in the base.
Error Indication
2. Gently step onto the scale and the unit will
automatically turn on. Once a steady
reading is taken, the display will lock and flash
the final weight.
lb
3. After inserting the batteries, replace the
battery cover and push cover backward.
lb
3. The scale will automatically shut off after
8 seconds.
Metallic Digital Scale
Metallic Digital Scale
Instruction Manual
Gold/Silver
Gold/Silver
SC428 / SC429
SC428 / SC429
To Insert or R
Operation
lb
Error Indica

Advertisement

loading
Need help?

Need help?

Do you have a question about the SC428 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BIOS LIVING SC428

  • Page 1 Introduction Thank you for purchasing the BIOS Living Metallic Digital Scale. This scale was developed with state-of-the-art electronics. This precision device has a weight capacity of 400 lbs / 180 kg and is equipped with an auto power ON / OFF function and auto zero reset.
  • Page 2 Error Indic Touch Sensor Touch Unit Conversion UNIT SWITCH (kg/lb) To change the unit from LB / KG, press lightly on Battery Advice Error Indic the touch sensor on the upper part of the back of the scale. The touch sensor is a small indented circle. Battery Advice Error Indic Battery Advice...

This manual is also suitable for:

Sc429