BIOS LIVING SC423 Instruction Manual

BIOS LIVING SC423 Instruction Manual

Jumbo digital display bath scale

Advertisement

Introduction

Thank you for purchasing the BIOS Living Jumbo Digital Display Bath Scale. This scale was developed with state-of-the-art electronics. This precision
device has a weight capacity of 550 lbs / 250 kg and is equipped with an extra large blue backlight screen.

Features

• Auto ON / OFF
• Auto zero reset
• Large blue backlit LCD (4" x 3½" / 10.16 x 8.89 cm)
Battery Installation (3 x AAA batteries included)
Open the compartment on the back of the scale and insert the batteries according to their polarity. Please be aware that inserting the batteries
incorrectly may cause permanent damage.
NOTE: If you do not intend to use this scale for a long period of time, it is advisable to remove the batteries before storing it away.

Using Your Scale

• Place scale on a hard flat surface
NOTE: If the scale is placed on a soft surface, such as carpet or an uneven floor, the results may be inaccurate or an error message may
occur.
• Step onto the scale gently, placing your feet evenly apart, and stand still until the reading blinks 3 times.
• The scale will shut off automatically after 15 seconds or once weight is removed.
• LB/KG/ST switchable
• Low battery / over-load indication
• Weight capacity: 550 lbs / 250 kg
lb
Jumbo Digital Display Bath Scale
Jumbo Digital Display Bath Scale
lb
Instruction Manual
SC423
SC423
lb

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC423 and is the answer not in the manual?

Questions and answers

Summary of Contents for BIOS LIVING SC423

  • Page 1 Introduction Thank you for purchasing the BIOS Living Jumbo Digital Display Bath Scale. This scale was developed with state-of-the-art electronics. This precision device has a weight capacity of 550 lbs / 250 kg and is equipped with an extra large blue backlight screen.
  • Page 2 Troubleshooting Error Problem Solution Step off the scale and wait a few minutes before trying again. Note: Do not use if you exceed the An error has occurred when taking a measurement. maximum weight capacity. Remove batteries, wait 10 seconds and reinsert them into Battery power is running low.

Table of Contents