Interchangeable Face Plates - Concord Camera Eye-Q Duo LCD Instruction Manual

Interchangeable Face Plates

The Concord Eye-Q Duo LCD comes with an extra removable face plate
that allows you to change the look of your camera.
Changing the face plate:
1. Open the Cable Connection panel by
sliding the door in the downward direction
and then lifting it until it is open, as
displayed in fig.6.2
2. Push down on the PRESS tab and gently
lift the face plate to remove. (fig.6.2)
3. Insert the face plate by aligning its tabs
with the grooves on the camera as
indicated in the illustration and snapping it
into place. (fig.6.3)
fig.6.2
fig.6.3
42