66
3-1. Basic operation
Map screen operation
Current position display
1
Press the "MAP" button.
2
Check that the current position
map is displayed.
To correct the current position
manually: P.102
●
While driving, the current position
mark is fixed on the screen and the
map moves.
●
The current position is automatically
set as the vehicle receives signals
from the GPS (Global Positioning Sys-
tem). If the current position is not cor-
rect, it is automatically corrected after
the vehicle receives signals from the
GPS.
●
After the 12-volt battery disconnec-
tion, or on a new vehicle, the current
position may not be correct. As soon
as the navigation system receives sig-
nals from the GPS, the correct current
position is displayed.
Map scale
1
Select
or
scale of the map screen.
●
The scale indicator bar appears at the
bottom of the screen.
●
Select and hold
changing the scale of the map screen.
●
The scale of the map screen can also
be changed by selecting the scale bar
directly. This function is not available
while driving.
●
Pinch outward on the screen to zoom
in and pinch inward to zoom out.
●
In areas where a micro city map is
available,
will change to
when the map screen is set to the
smallest scale.
●
When the map scale is at the mini-
mum range, a one way street is dis-
played by
. This is available
when one way mark display button is
set to on. (P.64)
Micro city map
For areas covered by the micro city
map (some major cities), a micro
city map on a scale of 25 m can be
selected.
When the map is scaled down to 50
m,
changes to
to change the
or
to continue
and can