Honda XRE 190 Owner's Manual page 146

XRE 190
 Headlight bulb
2
1
5
4
1. Tabs
2. Clips
3. Screws
4. Connector
5. Headlight assembly
1. Remove the meter panel (page 37).
2. Remove the headlight assembly by removing the
clips (page 37) and screws, and releasing the tabs.
3. Disconnect the connector.
4. Remove the dust cover.
3
3
1
5
1. Bulb set spring
2. Prong
3. "TOP" mark
4. Dust cover
5. Bulb
5. Remove the bulb set spring while pressing it and
then remove the bulb.
6. Install a new bulb and parts in the reverse order
of removal.
Install the dust cover with its "TOP" mark facing
up and place the prong on the dust cover into
the guide on the headlight case.
Do not touch the glass surface with your fingers. If
you touch the bulb with your bare hands, clean it with
a cloth moistened with alcohol.
2
3
4
61