YASKAWA CIPR-GA50 Series Manual page 7

1.
Connect the power supply connector between the drive and cooling fan.
2.
Align the notches on the fan with the pins on the drive and install the cooling fans in the
drive.
A - Alignment pins on drive
B - Front of drive
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the
drive.
YASKAWA TOEP C730600 0GA Fan Replacement Procedure
Figure 5.3 Connect the Power Supply Connector
Figure 5.4 Install the Cooling Fan
C - Notch on fan
5 Replace Cooling Fans
7