YASKAWA CIPR-GA50 Series Manual page 11

1.
Connect the power supply connector between the drive and cooling fan.
2.
Install the cooling fans so that they align with the pins on the drive.
A - Alignment pins on drive
B - Front of drive
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the
drive.
YASKAWA TOEP C730600 0GA Fan Replacement Procedure
Figure 5.12 Connecting the power supply connector
Figure 5.13 Installing the cooling fans
C - Notches
5 Replace Cooling Fans
11