D10241
Connecting of heaters 1800t, 2000t and 2400t
With the heaters 1800t, 2000t and 2400t the operating switch turns on 8V voltage,
which runs the 4430 unit, but the voltage reading on the display is incorrect (8V). It
is advisable to take the power for these units directly from the accumulator via a
separate fuse, in which case the reading on the display will be correct.
Shield the free cable end to
prevent short circuits
Connecting to the heater's control panel
4430A
Installation
- 32 -
BATTERY
The power cable must have
at least a 1 A fuse
en
490538A