Table of Contents
Advertisement
InsTallaTIon
Installation
Standard Components
Device
1671902
Standard SmarTRAC Accessories
7B0087
7B0084
7B0085
7B0086
5D00310
Connection to Power Supply
•
Insert the power cable into power socket on the back of the console and into a wall socket.
•
Turn on the device with push button located on the console above the power socket.
•
The device will initialize and perform a self-test. This may take a while.
•
At the end of the self-test the device enters the Home Menu and is ready for use.
Disconnect From Power Supply
Turn off the device using the push button located above the power socket on the back of the console.
SMARTRAC | OPERATOR'S MANUAL REV. 0 | 4/06/2018
SmarTRAC
Patient Stop Switch
Fixing Knobs, set of 4
Nylon Cord, 170 cm with Carabiner Hook
Power Cord UL-CSA 115V straight socket black or grey (for USA)
SmarTRAC Operator's Manual
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DYNATRON SmarTRAC and is the answer not in the manual?