Table of Contents
Advertisement
Control Reference Guide
Rear panel (1)
① WLAN [1A, 1B] connector
② WLAN [2A, 2B] connector
③ Bluetooth [BT] connector
④ GPS ANT. connector
Connect the 6 coaxial cables from the
external antenna SH-IN2568 (locally
procured) to the corresponding
connectors.
The coaxial cables are labeled
with "WIFI1", "WIFI2", "WIFI3",
"WIFI4", "WIFI5", and "GPS / GNSS"
respectively. Attach them to each
connector as follows.
Connect WIFI1 to WLAN [1A]
Connect WIFI2 to WLAN [1B]
Connect WIFI3 to WLAN [2A]
Connect WIFI4 to WLAN [2B]
Connect WIFI5 to Bluetooth [BT]
Connect GPS / GNSS to GPS.ANT
Important:
• Antenna other than SH-IN2568 is
not available.
Note:
• The external antenna SH-IN2568
contains built-in antennas of
WLAN×2, BT and GPS.
22
(continued)
• During GPS reception, the
signals received will regularly and
automatically set the recorder
clock to GPS time, and provide
speed information, if the recorder is
attached to a vehicle.
⑤ C AMERA [OTHERS 1, 2, 3, 4]
connector
Connect the Network Camera (sold
separately) using shielded LAN
cables.
OTHER1 : For Back Seat Camera
OTHER2 : For Side Camera (Left)
OTHER3 : For Side Camera (Rear)
OTHER4 : For Side Camera (Right)
⑥ CAMERA [FRONT] connector
Connect the Network Camera (sold
separately) using shielded LAN
cables.
⑦ PC, LAN connectors
Connect the recorder to PCs using
shielded LAN cables.
Note:
For details on how to connect a PC,
contact your supplier.
Hide quick links:
Advertisement
Table of Contents
