Sunlight Supply TITAN CONTROLS HERCULES 2 Instruction Manual

50 amp - high amperage controller

Notes:

_________________________________________________

Hercules 2

_________________________________________________

50 Amp – High Amperage Controller

________________________________________________

Instruction Manual

1 Square = 1 Foot

VANCOUVER, W ASHINGTON U.S.A.

www.titancontrols.net

Table of Contents

Need help?

Do you have a question about the TITAN CONTROLS HERCULES 2 and is the answer not in the manual?

Page 1 Notes: _________________________________________________ ® _________________________________________________ _________________________________________________ _________________________________________________ Hercules 2 _________________________________________________ _________________________________________________ 50 Amp – High Amperage Controller ________________________________________________ Instruction Manual 1 Square = 1 Foot VANCOUVER, W ASHINGTON U.S.A. VANCOUVER, W ASHINGTON U.S.A. www.titancontrols.net www.titancontrols.net...
Page 2 Hercules 2 WARRANTY SERVICE: Please read warranty information first If after reviewing the troubleshooting tips the unit will still not work, you should return it to the • Warnings Dealer where you purchased the controller. They will be able to further evaluate the unit and test its •...
Page 3 Warranty Information Hercules 2 – 50 Amp High Amperage Controller Overview • Titan Controls warrants the original purchase of this product against defects in material and ® workmanship under normal use for three (3) years from the date of purchase. The Hercules 2 is a ‘trigger’...
Page 4 Troubleshooting Tips Installation Example If the Hercules 2 is not performing as expected, try the following: Controlling an Air Conditioner, Heater or Light Bank A. Confirm that your power input is active from your breaker panel and providing 120 or 240 Volts/ 50 Amps/60 Hz to the controller.