Advertisement
Connecting the power cords to the 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, or
9223-42S system
Use this procedure to connect the power cords to the IBM Power System S914 (9009-41A and
9009-41G), IBM Power System S924 (9009-42A and 9009-42G), IBM Power System H924 (9223-42H),
or IBM Power System H924S (9223-42S) server.
Procedure
1. If applicable, open the rack door at the rear of the system unit that you are servicing.
2. Using your labels, reconnect the power cords (A) to the system unit.
Fasten the power cords (A) to the system using the hook-and-loop fasteners (B) as shown in Figure 57
on page 81 or Figure 58 on page 82.
Figure 57. Connecting the power cords to a rack-mounted system
Common procedures for installable features 81
Advertisement
