Advertisement
Assembly
Step 1
(continued)
Attach Post Base to Cylinder
Cover Pieces loosely with seven
Large Screws.
Step 2
Identify Center Rear Support Bracket. It has six holes, various sizes.
Place Center Rear Support
Bracket in place over the center
screw.
4
7 Required
Large Screw
Assemble one nut loosely over
the screw to attach the Center
Rear Support Bracket.
1 Req'd
Hex Nut
Step 2
(continued)
Turn unit over and assemble
large screw loosely through Cover
Pieces into base of Center Rear
Support Bracket.
1 Required
Large Screw
Step 3
1 Req'd
Hex Nut
Attach a Side Support Bracket
loosely with Hex Nut at top.
Assemble three small screws
loosely through Cover Pieces into
Center Rear Support Bracket.
3 Req'd
Small Screw
1 Required
Large Screw
Attach one large screw loosely
at base of Side Support Bracket.
Advertisement
