MAINTENANCE AND CLEANING
Maintenance The operation and maintenance of the cleaner is very simple. Clean the dust and
dirt left in the dustbin and on the filter. It is not necessary to clean the intake and the side
brushes every time.
Clean the Dustbin
1. Press the position A and slide the cover in the direction as shown in Fig. 12.
2. Take out the dustbin as shown in Fig. 13.
3. Open the upper cover of the dustbin as shown in Fig.14.
4. Lift up and take out the filter as shown in Fig.15.
5. Throw away the dust and dirt from the dustbin as shown in Fig.16.
6. Rinse the dustbin with tap water as shown in Fig.17, it is not necessary to wash every time.
7. Clean the filter with a brush as shown in Fig. 18. You should replace the filter every 3 months
if the vacuum cleaner is used often. If the filter becomes worn‐out, immediately replace it with a
new one. A worn‐out filter may cause damage to the vacuum cleaner.
8. Dry the filter well and place the filter and the dustbin lid back into place as shown in Fig. 19.
9. Reinsert the dustbin and slide back the cover as shown in Fig. 20.