Nic Indicator Codes; Power Supply Unit Indicator Codes - Dell PowerEdge T350 Installation And Service Manual

Table 27. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two
seconds
Blinking green (on for
two seconds and off for
two seconds)
LED Indicator off

NIC indicator codes

Each NIC on the back of the system has indicators that provide information about the activity and link status. The activity LED
indicator indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 108. NIC indicator codes
1. Link LED indicator
2. Activity LED indicator
Table 28. NIC indicator codes
NIC indicator codes
Link and activity indicators are off.
Link indicator is green, and activity indicator is blinking
green.
Link indicator is amber, and activity indicator is blinking
green.
Link indicator is green, and activity indicator is off.
Link indicator is amber, and activity indicator is off.
Link indicator is blinking green, and activity is off.

Power supply unit indicator codes

AC and DC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator. The indicator shows if
power is present or if a power fault has occurred.
Condition
Indicates that the laptop or tablet is connected.
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Condition
Indicates that the NIC is not connected to the network.
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is being sent or received.
Indicates that the NIC is connected to a valid network at less than its
maximum port speed, and data is being sent or received.
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is not being sent or received.
Indicates that the NIC is connected to a valid network at less than its
maximum port speed, and data is not being sent or received.
Indicates that the NIC identity is enabled through the NIC
configuration utility.
System diagnostics and indicator codes 121