Dell PowerEdge T350 Installation And Service Manual page 102

Figure 92. Installing the screws into the system board
Next steps
1. Replace the following components:
a. Trusted Platform Module (TPM)
NOTE: The TPM Module must be replaced only while installing new system board.
b. Expansion cards
c. Cooling fan
d. IDSDM module (If removed)
e. Internal USB (If removed)
f. Processor
g. Heat sink
h. Memory modules
i. Air shroud
2. Replace the iDRAC MAC address label from the system with the new iDRAC MAC address label that came with the
replacement system board.
3. Reconnect all cables to the system board.
102 Installing and removing system components