Installing The Front Bezel - Dell PowerEdge T350 Installation And Service Manual

NOTE: The bezel key is part of the LCD bezel package.
Steps
1. Unlock the bezel.
2. Holding the edges at the top, tilt the bezel to release from the system.
3. Unhook the bezel tabs from the slots at the bottom, and lift the bezel.
Figure 12. Removing the front bezel
Next steps
Replace the front bezel.

Installing the front bezel

Prerequisites
1. Follow the safety guidelines listed in
2. Locate and remove the bezel key.
NOTE: The bezel key is part of the bezel package.
Steps
1. Align and insert the bezel tabs into the slots in the system.
2. Press the bezel until clicks in place.
3. Lock the bezel.
Safety instructions.
Installing and removing system components 29