Raider RDI-IBW02 User Manual page 11

1.5. Instructions for safe handling, specific for your purchased impact wrench.
Loss of control over power tool could lead to the occurrence of accidents.
1.5.1. Do not use additional devices which are not recommended by the manufacturer for
this particular power tool. The fact that you can attach to specified device or machine working
tool does not ensure safe working with him.
1.5.2. Never put your hands near the rotary working tools.
1.5.3. If you perform activities which threaten to fall working tool of hidden wires under
tension, hold power tool only electric insulated handles. When entering the working tool in
contact with the wires under tension, it is transmitted through the metal details of the impact
wrench and this may lead to electric shock.
1.5.4. Use appropriate instruments to find any hidden beneath the surface pipelines, or
contact the appropriate local supply company. Into contact with the wires under tension can
cause fire or electric shock. Pipeline damage can lead to explosion. Deterioration of water has
the effect of major material damage and may cause electric shock.
1.5.5. Provide workpiece.
Detail, and attach with appropriate appliances or braces is anchored more firmly and securely
than if you hold it by hand.
1.5.6. Regularly clean your vent impact wrench.
1.5.7. Use only recommended battery and charger.
1.5.8. Keep the battery away from heat sources. Do not leave the battery for a long time
in high temperature (in direct sunlight, in proximity of heaters and wherever the temperature
exceeds 50°C).
1.5.9. The battery charging time cannot be longer than 5 hours. Otherwise the battery may
be damaged.
1.5.10. Avoid charging the battery in temperatures lower than 0°C.
1.5.11. Charger supplied with the impact wrench is designed for operation with this product
only. Do not use it for other purposes.
1.5.12. Do not put any metal objects into the charger.
1.5.13. Do not change direction of spindle rotation when the tool is operating. Otherwise
impact wrench may be damaged.
1.5.14. To clean the impact wrench use soft, dry cloth. Never use detergents or alcohol.
1.5.15. Disconnect charger from power supply before cleaning.
1.5.16. If you plan to charge more than one battery successively, make a 30 minute break
between charging.
1.6. Special conditions regarding safety of charger operation.
Before using the charger read all relevant information contained within this manual, see
markings on the charger and the product it is designed for.
1.6.1. To reduce the risk of potential personal injuries use the charger for Li-ion batteries
only. Other type batteries may explode and cause personal injury or material damages.
1.6.2. Do not expose the charger to moisture or water.
1.6.3. Use of any connecting elements not supplied or not recommended by the manufacturer
of the charger may cause fire, personal injury or electric shock.
1.6.4. Make sure the power cord is not located in pathway. It is not exposed to treading or
other danger (e.g. strong tension).
1.6.5. Do not use extension cord unless it is absolutely necessary. Use of improper extension
cord may cause fire or electric shock. If it is necessary to use extension cord, first make sure
that, extension cord socket matches plug prongs of the original charger power cord.
1.6.6. Extension cord is in good technical condition.
1.6.7. Do not use the charger with damaged cord or plug. Damage should be repaired by a
qualified person.
1.6.8. Do not use the charger after it has been hit, dropped or otherwise damaged. Entrust
the testing and potential repair to authorized RAIDER service workshop.
1.6.9. Do not try to dismantle the charger. All repairs are to be made by an authorized
RAIDER service workshop. Improper charger assembly may cause electric shock or fire.
1.6.10. Disconnect the charger from a power supply before starting any maintenance or
11