Raider RDI-IBW02 User Manual page 10

10 www.raider.bg
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to
the occurrence of an accident.
1.1.2. Do not operate in an environment where the impact wrench with an increased risk of
an explosion in the vicinity of flammable liquids, gases or powders.
During operation of the impact wrench can be separated sparks that can ignite powders or
fumes.
1.1.3. Keep children and bystanders at a safe distance while working with the impact wrench.
If your attention is diverted, you may lose control over the impact wrench.
1.2. Safety when working with electricity.
1.2.1. Plug of the impact wrench must be suitable for contact. In no case is allowed to
modify the structure of the plug. When working with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
1.2.2. Protect your impact wrench from rain and moisture.
Penetration of water into the impact wrench increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Be concentrated, watch their actions carefully and act cautiously and prudently.
Do not use the impact wrench, when you are tired or under the influence of drugs, alcohol or
narcotic drugs.
A moment of distraction at work striking impact wrench may have the effect of extremely
serious injuries.
1.3.2. Work with protective work clothing and always with safety glasses.
Wearing Suitable for drilling shock and the activities of personal protective equipment, such
as respiratory masks, healthy, tightly closed shoes grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk of accident.
1.3.3. Avoid the danger of switch on the impact wrench inadvertently. If, when you carry the
impact wrench, keep your finger on the trigger switch, there is the risk of accident.
1.3.4. Avoid unnatural positions of the body. Work in a stable position of the body at any
time and keep the balance. So you can control the impact wrench better and safer if unexpected
situations arise.
1.3.5. Work with appropriate clothing. Do not operate with loose clothing or ornaments.
Keep your hair, clothes and gloves at a safe distance from rotating units of the impact wrench.
Robes, jewelry, long hair can be caught and carried away by chuck.
1.4. Care to impact wrench.
1.4.1. Do not overload the impact wrench. Use only the impact wrench in accordance with its
intended purpose. You will operate better and safer when using the appropriate impact wrench
manufacturer in the specified range of load.
1.4.2. Keep impact wrench in places where they could not be reached by children. Do not
let it be used by persons who are not familiar with how to work with it and have not read those
instructions. When in the hands of inexperienced users, the impact wrench can be dangerous.
1.4.3. Keep your impact wrench carefully. Check whether the mobile units operate impeccable,
whether it spells, if there is broken or damaged item which distort or alter the functions of
the impact wrench. Before using the impact wrench, make sure that the damaged parts to be
repaired. Many accidents are caused by poorly maintained power tools and appliances.
1.4.4. Keep your cutting tools well sharpened and always clean. Properly maintained cutting
tools with sharp edges have less resistance and working with them easier.
1.4.5. Use the impact wrench, attachment, working tools, etc., according to the
manufacturer's instructions. In doing so must comply with specific operating conditions
and operations to perform. Using a impact wrench than those provided by the manufacturer
applications increases the risk of accidents.