ULTRA-LOCK MOTOR SETTINGS
STEP 1 – INITIAL SETUP
PAIR MOTOR WITH CONTROLLER
Select channel on controller.
IMPORTANT
_________ _______ _______ ______ ______
Consult user manual for your controller for
information on selecting channel.
Motor is now in step mode and ready for setting limits.
CHECK FOR MOTOR DIRECTION
To check travel direction of shade, press UP or DOWN
on controller
Hold P1 button on motor head.
Motor Response
To reverse shade direction, hold both UP and DOWN.
Until the motor responds
ULTRA-LOCK MOTOR SETTINGS - Zipscreen Installation Manual | v4.2| August 2019
Hold STOP on controller.
Motor Response___
Page 1 of 5
2019 ©Copyright All Rights Reserved Rollease Acmeda
_
Need help?
Do you have a question about the Zipscreen and is the answer not in the manual?
Questions and answers