Page 1
ST-302-231-A Electric Fan Heater This product is only suitable for well insulated spaces or occasional use. STEB-564...
Page 2
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE. Read the instruction manual: When this symbol is marked on a product, it means that the instruction manual must be read. Do not use the appliance for other than its intended use.
Page 3
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE. PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. - The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE. SPECIFICATIONS Specifications subject to change without notice ST-302-231-A THERMAL POWER (kW) HEATING AREA (m POWER (Volt / Hz) 220-240 ~ 50 HEAT SETTINGS FUNCTIONS / SETTINGS Unit is Off Fan Runs -...
Page 6
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE. Safety Information IMPORTANT: Read and understand all of the safety information and instructions in this manual before operating your heater. RISK OF EXPLOSION! Do Not operate this heater where there are harmful, DANGER explosive or flammable gasses, fumes or hazardous substances.
Page 7
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE. Children should be supervised NEVER place the heater on a so they do not play with the small, uneven or unstable surface appliance. that may cause the heater to fall. NEVER connect other ALWAYS use only the electrical appliances to the same...
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE. Assembly (See Page 7-8) Thermostat Instructions Align holes in heater leg frame with – At first, set the thermostat to “+” and lower inner bracket. let the heater operate with full power input.
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE. Troubleshooting Problem Cause Solution 1. Fan runs 1. Heater is operating Fan stays on when heat continuously correctly. shuts off. while the heater is operating. 1. Fan speed stays 1. Heater is operating Fan speed stays the constant.