Download Print this page
Rukket Sock It! Lite Assembly Instructions

Rukket Sock It! Lite Assembly Instructions

7x7 stake-down baseball/softball net

Advertisement

Quick Links

7X7 SOCK IT! LITE STAKE-DOWN BASEBALL / SOFTBALL NET
ASSEMBLY INSTRUCTIONS
Our video instructions provide the best guidance for setting up your Sock It! Baseball/Softball Net.
They can be viewed online at
RukketSports
Please use adult supervision and follow the instructions
when setting up and using this net. Regular use or abuse
will eventually strain the netting and may break it. Do not
stand behind the net. This net is not intended for personal
protection. This net deflects fast moving objects, so people
should be at least ten (10) feet away.
Prior to Use: Inspect the netting and frame for damage or
wear. Make sure the frame and net are assembled correctly
and on a flat surface, at least ten (10) feet away from
structures and vehicles. The user should be positioned
directly in front of the net. Failure to follow these precautions
could result in serious injury or damage to property.
1. Lay out net at on the
2. Slide middle bar piece
3. Set out the two base
ground red velcro tab
into the receiving pole
pieces so they are in line
closest to you. There should
across from the angled pole
with the sleeves of the net.
be sleeves on the left and
insert sections.
Stake down the pieces
right. Note: Red velcro tab
through the vertical holes.
used for orientation
purposes only
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sock It! Lite and is the answer not in the manual?

Questions and answers

Summary of Contents for Rukket Sock It! Lite

  • Page 1 7X7 SOCK IT! LITE STAKE-DOWN BASEBALL / SOFTBALL NET ASSEMBLY INSTRUCTIONS Our video instructions provide the best guidance for setting up your Sock It! Baseball/Softball Net. They can be viewed online at RukketSports Please use adult supervision and follow the instructions when setting up and using this net.
  • Page 2 7X7 SOCK IT! LITE STAKE-DOWN BASEBALL / SOFTBALL NET ASSEMBLY INSTRUCTIONS 5. Thread sleeve over black 4. Install the lower black 6. Repear with sleeve pocket ride. Make sure logo is not rods with coupling tubes over other black rod.