Table of Contents
Advertisement
Quick Links
Rukket Rebounder pro
Rukket Rebounder pro
Our video instructions provide the best guidance for setting up your Rebounder. They can be viewed online at
12
38
1
Hex Key
HARDWARE
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
2
Plunger Bolts
connected by a
Paracord
Bolt Pairs
Bungees
NET
1
Wrench
Top Crossbar
Right Side Bar
Right Adjustment
Assembly
Rear Support
Right Front
Angled Leg
Bottom Crossbar
NET EXPANDER
Left Side Bar
Left Adjustment
Assembly
Leg
Rear Support
Leg
Bottom Crossbar
Left Front
Angled Leg
FRAME
PAGE
1
Advertisement
Table of Contents
Related Manuals for Rukket Rebounder Pro
Summary of Contents for Rukket Rebounder Pro
- Page 1 Rukket Rebounder pro Rukket Rebounder pro ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Our video instructions provide the best guidance for setting up your Rebounder. They can be viewed online at Top Crossbar Plunger Bolts connected by a Paracord Left Side Bar Right Side Bar...
- Page 2 Rukket Rebounder pro Rukket Rebounder pro ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS PRODUCT SAFETY WARNING -Keep hands and ngers clear of all moving parts. -When adjusting the angle of the rebounder, keep positive control of the top crossbar so as not to drop it on your head or body.
- Page 3 Rukket Rebounder pro Rukket Rebounder pro ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Screw the plunger bolts into the welded on nut and tighten down. Pull the cord to disengage the plunger and release it to allow the plunger to engage one of the holes. Set both of the rear support middle bars at the same setting so that they are both at the same angle.
- Page 4 Rukket Rebounder pro Rukket Rebounder pro ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Attach the two straight lower legs with silicone traction pads to the remaining bottom crossbar to make the rear support assembly. Attach the rear support assembly to the rear support middle bars. When the frame is securely bolted together, stand it up.
- Page 5 Rukket Rebounder pro ASSEMBLY INSTRUCTIONS Hang the netting by passing the top crossbar bungees over the upper crossbar and hooking them back onto the thick woven edge of the netting Hook the two bottom lower crossbar bungees around the lower crossbar to stretch the netting up-and-down.
- Page 6 Rukket Rebounder pro ASSEMBLY INSTRUCTIONS Alternate adding the remaining bungees between the top, bottom, left and right to ensure that the netting is stretched evenly. We suggest using all of the bungees, spaced 3 to 4 squares apart, to create maximum rebounding action.
- Page 7 Rukket Rebounder pro ADJUSTMENT INSTRUCTIONS Please read our product safety warnings on page two before adjusting the rebounder. Pull back on the top To adjust your rebound- crossbar, slightly raising er, step on the rear the lower front of the...
Need help?
Do you have a question about the Rebounder Pro and is the answer not in the manual?
Questions and answers