Advertisement
Quick Links
6X10 AIR DEFENSE ADJUSTABLE RETURN NET
Our video instructions provide the best guidance for setting up your 6X10 Air Defense Adjustable Return Net.
PRIOR TO EACH USE
Inspect the netting and frame for
damage or wear. Make sure the
frame and net are assembled
correctly and on a at surface, at
least ten (10) feet away from
structures and vehicles. Failure to
follow these precautions could
result in serious injury or
damage to property.
1) Screw the rear leg extenders
onto the backs of the legs. Use the
buttons on the center base bars to
snap them together. Then, attach
the assembled center base bar to
the legs. The side base poles
should be positioned so the
straight and angled receiving holes
are positioned up. The angled
receiving hole should point
towards the basketball goal.
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
They can be viewed online at
2) Lay the net out at in front of
your basketball hoop so that the
logos are facing up.
RukketSports
3) For the vertical barrier net
orientation, insert lower berglass
rod, with coupling tube on top,
into vertical receiving hole. Repeat
for other side.
PAGE
1
V1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rukket HOOP200
Summary of Contents for Rukket HOOP200
- Page 1 6X10 AIR DEFENSE ADJUSTABLE RETURN NET Our video instructions provide the best guidance for setting up your 6X10 Air Defense Adjustable Return Net. They can be viewed online at RukketSports PRIOR TO EACH USE Inspect the netting and frame for damage or wear.
- Page 2 4) For ball return net orientation, 6) Insert the berglass pole with 5) Thread the sleeves over the rods insert lower berglass rod, with metal knob on top into the berglass making sure that the black bungees coupling tube on top, into angled pole that is already attached to the are at the bottom.
Need help?
Do you have a question about the HOOP200 and is the answer not in the manual?
Questions and answers