Honeywell NOTIFIER AM-8000 Installation Manual page 5

EN 54 : Informations
EN54-2 13.7
EN54
Max 512
!
Sensors / Manual
Call Points per
microprocessor.

EN54

Optional Functions
Output to fire alarm devices
Output to fire protection equipment
Fault monitoring of fire protection equipment
Delays to outputs
Dependencies on more than one alarm signal
Fault signals from point
Total loss of power supply
Disablement of addressable points
Test Condition
Indication of the test condition
Indication of zones in the test state

EN54

Function
Power supply from main source
Power supply from battery source in standby
Re-charging and check of the battery source
Power supply fault detection and signalling
PAGE - 2
NOTIFIER ITALIA

The AM-8000 control unit has a maximum capacity of : 636 sensors
and 636 addressable modules .
If this function is not appropriately used, it can contravene the EN54
requirements.
This limit includes the possible conventional sensors and buttons
connected to the system with zone modules.
Therefore, check the number of installed devices and ensure their types
are in conformity with the rule
.
This fire detection control unit is in accordance with the
EN54-2/4
In addition to the basic EN 54 requirements, the control unit is in conformity with the
following optional operation requirements
The power supply section of the AM-8000 control unit is in conformity with the
following EN54-4 requirements.
Notifier Italia S.r.l. Via Grandi, 22 -20097 San Donato
Analog Addressable Fire Detection Panel AM-8000
type: BB-8000 with terminal LCD-8000-F or LCD-8000-L
Option with requirements: EN-54-2: 7.8, 7.10, 7.10, 7.11,
7.12 ( type A ), 8.3, 8.4, 9.5, 10, 10.2, 10.3
Manuale di installazione
Doc. 160.1-AM8000-ITA Rev A.3
1293
Milanese (MI), Italy
12
1293 – CPD - 0316
EN 54-2, EN 54-4
requirements of rule
.
EN 54.2 reference
7.8
7.10
7.10
7.11
7.12 ( type A )
8.3
8.4
9.5
10
10.2
10.3
EN 54.4 reference
5.1
5.2
5.3
5.4
AM-8000
AM8000_manu-inst