Table of Contents
Advertisement
Using Channel Zapping
Channel zapping lets you get a quick look at programs broadcast on up to seven additional
channels while you're watching a TV program on an eighth channel. If you see a different
channel that you want to watch, you can make it your main program.
To use channel zapping, you must be using the jumper cable that connects the ANT 2 and
RF Output ports. This cable was installed on your TV at the factory. You must also turn off
the ANT 2 port using the menus, as described below. This frees the necessary tuner.
Turning Off the ANT 2 Port
1
Make sure the jumper cable connecting the ANT 2 and RF Output ports is still installed
on the back of your TV.
2
Press the Menu button on the TV panel or remote control. You see the Video menu.
3
Press Next > to highlight Channel, then press Enter.
4
Press Select d to highlight Use of Ant. 2, then press Next > to select OFF.
5
Press Menu to exit the menu system.
Note
You also need to turn off
the V-Chip feature to use
channel zapping. See
page 55 for instructions.
73
Using TV Features
Advertisement
Table of Contents
