Epson LivingStation LS47P1D User Manual

Epson LivingStation LS47P1D User Manual

Hdtv lcd projection television
Hide thumbs Also See for LivingStation LS47P1D:
Table of Contents

Advertisement

Quick Links

®
HDTV LCD Projection Television
LS47P1D
LS57P1D
User's Guide

Advertisement

Table of Contents
loading

Summary of Contents for Epson LivingStation LS47P1D

  • Page 1 ® HDTV LCD Projection Television LS47P1D LS57P1D ● User’s Guide...
  • Page 2 Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other equipment.
  • Page 3: Table Of Contents

    Contents Setting Up the TV Selecting a Location ..........7 Important Safety Instructions.
  • Page 4 Setting Up and Setting Up Your TV Channels ......... 47 Controlling Channels Automatically Setting Up Your Channels .
  • Page 5 Notices Epson America, Inc., Limited Warranty........127 ENERGY STAR Compliance .
  • Page 6 Contents...
  • Page 7: Setting Up The Tv

    Setting Up the TV Follow the steps in these sections to prepare a spot for your TV, set it up, connect it, turn it on, and prepare it for viewing: • “Selecting a Location” below • “Installing the Set-Top Shelf ” on page 12 •...
  • Page 8 • Do not place the TV in an area subject to vibration. Note To CATV system installers: • Do not place the TV or the remote control on top of or near heat-producing equipment Article 820-40 of the NEC or in a hot location. provides guidelines for proper grounding and •...
  • Page 9 Do not use sharp tools to remove a card from a slot or you may damage the slot and card. • Use only the ink cassette and paper specified for use in the Epson Livingstation printer (part number V13H151010). •...
  • Page 10: Outdoor Antenna Installation And Grounding

    Outdoor Antenna Installation and Grounding • It is best to have a professional technician install an antenna on the roof of a structure. If you install an antenna yourself, be careful to avoid serious injury. • If an outside antenna is connected through other equipment, be sure the antenna system is grounded so as to provide protection against voltage surges and built-up static charges.
  • Page 11: Suggested Supports Or Stands

    Suggested Supports or Stands You can use an optional Epson TV stand to support your TV. Order part number V12H003R03 (for the LS47P1D) or V12H003R02 (for the LS57P1D) from your dealer. If you use your own stand, make sure it can securely support the TV as follows:...
  • Page 12: Installing The Set-Top Shelf

    Installing the Set-Top Shelf The set-top shelf provides a convenient support for a center surround sound speaker or other component on top of the TV. The shelf can hold up to 11 lb (5 kg). Caution Don’t fold the shelf Fold the shelf into an upside-down L-shape with the shorter end on top.
  • Page 13: Securing The Tv

    Securing the TV You may want to secure the TV to a wall or other support so it stays upright on its stand during an earthquake or other situation. Use wires and screws connected to the outer pair of holes on the top of the TV to secure the TV to the wall or other support. Secure the TV to a wall or other support...
  • Page 14: Connecting An Atsc/Ntsc Tuner

    Connecting an ATSC/NTSC Tuner Follow these instructions to connect an ATSC/NTSC tuner to your TV. Turn off and unplug your TV and tuner. Slide the RESOLUTION SELECT switch on the back of the tuner to 1080i. Note For more information on Connect your antenna cable to the ANT.
  • Page 15: Connecting The Cd-R/Rw Drive

    Connect the square end of a USB cable to the USB port on your external CD-R/RW Note drive. If you purchased an optional Epson TV stand, a mounting bracket is Connect the flat end of the USB cable to the EXT. I/F connector on the back of the TV. included for the drive. You...
  • Page 16: Connecting Other Equipment

    Connecting Other Equipment Note For a description of all the You can connect the TV to a variety of equipment. Follow the steps in the applicable sections available connectors on the front and back panels, below, depending on the equipment you’re connecting and the type of connector or service see the inside back cover you’re using.
  • Page 17: Antenna Or Direct Cable Tv Connection

    Antenna or Direct Cable TV Connection Connect the TV to an outside antenna or to your cable system using a 75-ohm coaxial cable. Connect the cable coming into the house to the ANT 1 connector on the back of the TV. If your coaxial cable has a screw-type connector on the end, secure it by turning the end clockwise.
  • Page 18: Cable Box Connections

    Cable Box Connections Note Before connecting a cable The connection method differs, depending on the type of cable box you have. Your cable box box to the TV, be sure to may unscramble signals for all of your channels or it may unscramble only some of them. read any instructions that came with the cable box.
  • Page 19 Cable Box Unscrambles Only Some of Your Channels Note If your cable box unscrambles signals for only some of your channels, connect it as follows: Be sure to retain the jumper cable in case you change Connect the cable coming into the house to the ANT 1 connector on the back of the TV. your TV connections later.
  • Page 20: Satellite Receiver Connection

    Satellite Receiver Connection If you’ll also be attaching a VCR to the TV, you need to use a different connection method so you can record TV programs. See “VCR and Satellite Receiver Connection” on page 27. Turn off and unplug your TV and your satellite receiver. Note If your satellite receiver Connect the satellite antenna cable coming into your house to the Satellite In connector...
  • Page 21: Dvd Player With A Dvi Connection

    DVD Player With a DVI Connection Turn off and unplug your TV and your DVD player. Connect one end of a DVI-HDTV cable to the DVI-HDTV Input connector on the back of the TV. Connect the other end of the DVI-HDTV cable to the DVI-HDTV OUT connector on your DVD player.
  • Page 22: Dvd Player With Component Video Connection

    DVD Player With Component Video Connection Note The connectors may be Connect one end of the component video cable to any available set of Y (green), PB labeled Y, B-Y, R-Y, or Y, Cb, (blue), and PR (red) connectors on the back of the TV. Cr, or Y, Pb, Pr on your DVD player, so just match the Connect the other end of the component video cable to the corresponding color...
  • Page 23: Dvd Player With An S-Video Connection

    DVD Player With an S-Video Connection Note If your DVD player doesn’t Connect one end of an S-video cable to one of the S-Video connectors on the back of have an S-video the TV or to the one on the front of the TV beneath the connector cover. connector, you can connect a video cable Connect the other end of the S-video cable to the S-Video connector on your DVD...
  • Page 24: Vcr Connection

    VCR Connection Follow these steps to connect a VCR by itself. If you’re connecting a cable, cable box, or satellite receiver along with the VCR, see the instructions in the sections following this one instead. Note If your VCR doesn’t have Connect one end of an S-video cable to one of the S-Video connectors on the back of an S-video connector, you the TV or to the one on the front of the TV beneath the connector cover.
  • Page 25: Vcr And Cable Service (Without Cable Box) Connection

    VCR and Cable Service (Without Cable Box) Connection Connect the VCR as described in “VCR Connection” on page 24. Connect the cable coming into the house to the IN connector on the VCR. Connect one end of a coaxial cable to the OUT connector on the VCR. Connect the other end of the coaxial cable to the ANT 1 connector on the back of the If your coaxial cable has a screw-type connector on the end, secure it by turning the end clockwise.
  • Page 26: Vcr And Cable Box Connection

    VCR and Cable Box Connection Note Before connecting a cable Turn off and unplug your TV, VCR, and cable box. box to the TV, be sure to read any instructions that Connect the VCR as described in “VCR Connection” on page 24. came with the cable box.
  • Page 27: Vcr And Satellite Receiver Connection

    VCR and Satellite Receiver Connection Note Before connecting a Turn off and unplug your TV, VCR, and satellite receiver. satellite receiver to the TV, be sure to read any Connect the VCR as described in “VCR Connection” on page 24. instructions that came with the receiver.
  • Page 28 If your satellite service does not include local channels, you can also connect an outside antenna or cable service line to the VHF/UHF IN connector on the VCR. Then connect a coaxial cable to the VHF/UHF OUT connector and to the ANT 1 connector on the back of your TV.
  • Page 29: Stereo Amplifier Connection

    Stereo Amplifier Connection Note You can’t connect external Connect one end of a standard, red/white audio cable to the R and L Audio Output speakers to the TV directly; Variable connectors on the back of your TV. you must connect them to a stereo amplifier.
  • Page 30: Pc Or Game Console Connection

    PC or Game Console Connection For a PC, connect one end of a Dsub15 RGB for PC cable to the monitor or PC output connector on the back of your PC. For a game console, just use the cable that came with the console. Connect the other end of the cable to the PC connector on the front of the TV.
  • Page 31: Camcorder, Digital Camera, Or Other Portable Video Connection

    Camcorder, Digital Camera, or Other Portable Video Connection It’s best to connect a portable video device to the S-Video or Video connector on the front of the TV; however, you can use the connectors on the back. These instructions use a camcorder as an example.
  • Page 32: Other Optional Device Connections

    Other Optional Device Connections Note Headphones When you connect headphones, the TV Connect headphones to the Headphone connector on the front of the TV. speakers are turned off, but sound is still audible from any audio source you have connected to the TV. TV’s front connector panel...
  • Page 33: Preparing The Remote Control

    Preparing the Remote Control Before you can use the remote control, you need to insert the batteries and make sure you aim it correctly. For a description of its functions when using it to operate the TV, see the inside Caution front cover of this book;...
  • Page 34: Operating The Remote Control

    Operating the Remote Control Aim the remote control at the front of the TV, within about a 25° horizontal angle to the left or right and a 15° vertical angle up or down from the remote receiver. Receiver Make sure the room lighting is not too bright and not shining directly on the remote control or the TV receiver window.
  • Page 35: Controlling An Atsc/Ntsc Tuner With The Remote Control

    Controlling an ATSC/NTSC Tuner With the Remote Control Note You can also program the You can also use the TV’s remote control to operate an ATSC/NTSC tuner. That way, you remote to operate other equipment you have only need to keep one remote control at hand. connected to the TV.
  • Page 36: Controlling Other Equipment With The Remote Control

    Controlling Other Equipment With the Remote Control Note If there are multiple codes You can program the remote control to operate other home theater equipment, such as a listed for your equipment manufacturer and the first DVD player, VCR, or satellite receiver. That way, you can use just one remote control when one you choose doesn’t watching movies or TV programs.
  • Page 37: Remote Control Programming Codes

    Remote Control Programming Codes The programming code for the Epson Livingstation ATSC/NTSC tuner is 101. Codes for other manufacturers’ products are listed below. DVD player programming codes Manufacturer Code Manufacturer Code Aiwa Philips 401, 426, 433 Denon 406, 423 Pioneer...
  • Page 38 VCR programming codes (continued) Manufacturer Code Manufacturer Code Canon 328, 351 Pentax Carver Pentax Research 333, 346 Philco 312, 328, 334, 349, 351 Citizen 310, 314, 319, 329, 346 Philips 319, 328, 349, 351, 358 Colortyme Pilot Colt Pioneer 316, 343, 350, 351 Craig 313, 319, 329, 333 Proscan / RCA...
  • Page 39 VCR programming codes (continued) Manufacturer Code Manufacturer Code Headquarter Signature 2000 336, 364 (M. Ward) Hitachi 316, 331, 332, 351, 353 Singer 301, 328, 333 Hi-Q 313, 314 Sony 301, 302, 303, 360, 361, Instant Replay 328, 351 316, 328 JC Penney 308, 310, 311, 316, 317, SV2000...
  • Page 40 Satellite receiver programming codes Manufacturer Code Manufacturer Code Alphastar Philips Echostar 147, 148 Primestar 144, 145, 146 RCA / Proscan 144, 145, 146 GI (Motorola) Sony Hitachi 137, 138 Toshiba Hughes Uniden Radio Shack Magnavox Zenith Panasonic Cable box programming codes Manufacturer Code Manufacturer...
  • Page 41: Plugging In And Turning On The Tv

    Plugging In and Turning On the TV After your video and audio equipment are connected and the remote control is ready, you can plug in and turn on the TV. You may want to turn on your connected equipment and insert a tape or disc, if necessary, to test the TV with all of its video and audio sources.
  • Page 42: Changing The Language Of The Menus And Screen Text

    If you see a blank screen with No Signal at the bottom: No Signal • Turn on the source (VCR, DVD, etc.) • Insert a disc or tape, if you’re viewing one, and press Play Press the TV/Video button to select the source •...
  • Page 43: Skipping Unused Input Sources

    Press Prev < or Next > to select English, Français (French), or Español (Spanish). Press Exit to select another menu or press Menu to exit the menu system. Skipping Unused Input Sources As you switch between input sources using the TV/Video button, the TV goes to sources to which you’ve connected equipment.
  • Page 44: Labelling Input Sources

    Labelling Input Sources It’s helpful to label your input sources if you’re using more than one device with your TV, such as a DVD player, VCR, etc. Then you can easily recognize the devices as you switch between them. The label appears on the TV screen when you display or switch input sources. Press the Menu button on the TV panel or the remote control.
  • Page 45: Selecting A Predefined Label

    Selecting a Predefined Label Press Select d or Select u to highlight the label you want. If 1/2 appears in the bottom right corner of the screen, you can press Next > to view more predefined labels on a second screen. (Press Prev < to return to screen 1.) Press Enter.
  • Page 46: Turning Off The Tv

    Turning Off the TV Caution Turn off the TV when not in Press the Power button on the TV panel or the remote control. use. Continuous 24-hour-a- day use may reduce its overall life. Power Power STB1 STB2 VCR DVD Power light button PAUSE...
  • Page 47: Setting Up And Controlling Channels

    Setting Up and Controlling Channels Note If you plan to use your TV’s built-in tuner to view television programs, you’ll need to set up If you watch TV programs your available channels. You may also want to use the TV’s channel control features or block using an ATSC/NTSC tuner, unwanted viewing of channels or input sources by children, as described in these sections: or a cable, satellite, or...
  • Page 48 First make sure the correct television source type is selected for Antenna 1 and/or Antenna 2. Select TV for broadcast television via an antenna outside your house. Select CATV for cable television via a cable service line brought into your house. If you need to change the option, press Select d or Select u to highlight the Antenna 1 or Antenna 2 setting, then press Prev <...
  • Page 49: Manually Adding Or Skipping Channels

    Manually Adding or Skipping Channels For channels that are not automatically detected when you use Auto Program, you can use Manual Program to add them. You can also choose to have the TV skip certain channels so you don’t have to cycle through them when you change channels. Press Select d to highlight Manual Program, then press Enter.
  • Page 50: Selecting Channels

    Selecting Channels Note If you’re using an ATSC/ To select the channel you want to watch, do one of the following: NTSC tuner or a cable, satellite, or digital TV receiver with a separate • Enter the channel number using the number keys and press Ch Enter. receiver box, you can select TV channels using Press the Ch + or –...
  • Page 51: Labelling Tv Channels

    Labelling TV Channels You may want to label your channels so you can easily identify them by name instead of just by number. The channel label appears with the number in the upper right corner of the screen when you display or switch channels. Press the Menu button on the TV panel or the remote control.
  • Page 52: Selecting A Predefined Label

    Selecting a Predefined Label Press Select d or Select u to highlight the label (such as CBS) in the Edit column. If you don’t see a particular label, press Prev < or Next > to display the next screen. Press Enter. The new label is listed in the Label column and the Channel number is highlighted again.
  • Page 53: Setting Up Parental Controls

    Setting Up Parental Controls You can control access to rated television programs and block access to certain channels and input sources to prevent viewing of unsuitable materials. The person controlling access creates a password that allows him or her to set up, lock, and unlock the parental controls. Before setting up parental controls, you need to change the default password to a new one.
  • Page 54 Then you see the Lock menu. Password change Press Select d to highlight Password Change, then press Enter. You see this screen: Use the number buttons on the remote control to enter a four-digit password. Enter the same password again to confirm it. You return to the Lock menu. To block programs using V-Chip, see page 55.
  • Page 55: Blocking Programs Using V-Chip

    Blocking Programs Using V-Chip Your TV is equipped with V-Chip technology that allows you to block the display of TV programs or movies based upon their content rating. You can also block display of programs or movies that don’t carry V-Chip ratings (unrated programs). Whenever you need to change the ratings or remove blocking, you need to enter a password.
  • Page 56 Press Select d to highlight Country, then press Prev < or Next > to select U.S.A. or Canada. If you want to block access to programs that don’t carry V-Chip ratings, press Select u to highlight Unrated. Then press Prev < or Next > to select Block. To set up V-Chip blocking, press Select u to highlight Rating and press Enter.
  • Page 57 11 If you selected TV Rating, you see these options: All of the ratings are unblocked by default. Press Select d or Select u to select an Age Based rating. If desired, press Prev < or Next > to select a Content Based rating. Press Enter to block programs with the selected rating and any more mature ratings (–...
  • Page 58 V-Chip Ratings U.S.A. TV ratings Rating Description Age-based ratings TV-Y All Children Designed to be appropriate for all children, including ages 2 to 6. TV-Y7 Directed to Older Children Designed for children aged 7 and above. TV-G General Audience Designed to be suitable for all ages. TV-PG Parental Guidance Suggested Contains material that parents may find unsuitable for younger children.
  • Page 59: Blocking Channels And Input Sources

    French ratings (for Canada) Rating Description General Considered appropriate for all age groups. 8 ans+ General for 8 years and older Not appropriate for children under 8 without supervision. 13 ans+ Over 13 years May not be appropriate for children under 13. 16 ans+ Over 16 years May not be appropriate for children under 16.
  • Page 60 The highlight moves to the first character in the password field: Using the number buttons on the remote control, enter your password. You see the Lock menu: Channel & Game Lock is highlighted. Press Prev < or Next > to select ON. To lock a channel, press Select d to highlight Channel Lock, then press Enter.
  • Page 61: Accessing Blocked Programs, Movies, Channels, And Input Sources

    Press Select d or Select u to highlight the channel number, then press Enter. The highlight moves to the Lock column. Press Prev < or Next > to select Lock or unlock (–). Then press Enter. Repeat steps 7 and 8 to lock any other channels, then press Exit to return to the Lock menu.
  • Page 62 If you see one of these screens and you want to access the program, movie, channel, or input source, follow these steps: Press Enter. You see a screen asking you to enter your password. Enter your 4-digit password using the remote control number buttons. The program, movie, channel, or input source is unblocked and the blocking feature is turned off.
  • Page 63: Adjusting The Picture And Sound

    Adjusting the Picture and Sound You can make adjustments to your TV’s picture and sound quality, as described in these sections: • “Adjusting the Picture Quality” on page 63 • “Selecting the Aspect Ratio” on page 66 • “Adjusting the Sound” on page 68 Adjusting the Picture Quality Note Your TV offers three color modes (preset picture settings) that let you quickly adjust the...
  • Page 64: Changing The Color Mode

    Changing the Color Mode Press Enter. Press Select d or Select u to choose one of the following, then press Enter: Note Dynamic If the screen color is too Best for viewing movies in a brightly lit room. Colors appear warm and vibrant. warm (red) or cool (blue), you can adjust it with the Theater...
  • Page 65: Adjusting The Color Temperature

    Adjusting the Color Temperature Press Select d or Select u to highlight Color Temp.. Press Prev < or Next > to select one of these settings: Warm Changes the overall tone to emphasize warm colors, such as gold and brown. Cool Changes the overall tone to emphasize cool colors, such as blue and green.
  • Page 66: Selecting The Aspect Ratio

    Press Select d to highlight the 480p Color Matrix setting. Press Prev < or Next > to select DVD (to optimize the quality of DVD images) or HDTV (to optimize the quality of EDTV images). Press Exit to select another menu or press Menu to exit the menu system. Selecting the Aspect Ratio Most TV and video signals determine the size of the image on your screen.
  • Page 67: Selecting The Default Aspect Ratio

    Wide stretches a standard 4:3 ratio image to fit into your 16:9 ratio screen, but the image size stretches increasingly more from the center to the sides. Zoom enlarges the entire screen and cuts off some of the top and bottom for a closer view. Use Zoom when you’re watching movies broadcast in Letterbox format so they fit your screen.
  • Page 68: Adjusting The Sound

    Adjusting the Sound To turn the TV speaker volume up or down, use TV/Video Mute Favorite Mute the Vol. up and down buttons on the TV panel or Vol. button Volume remote control. To mute the sound, press the Note button Mute button on the remote control.
  • Page 69 Adjusting the Picture and Sound...
  • Page 70: Using Tv Features

    Using TV Features Your TV provides various features to enhance your viewing experience, as described in these sections: • “Printing What You See on the Screen” on page 69 • “Using Picture-Outside-Picture (POP)” on page 71 • “Using Channel Zapping” on page 73 •...
  • Page 71 (To freeze additional images, press the Freeze button again. The previously frozen images are erased.) To enlarge the selected image, press Enter. To return to the Freeze window, press Exit. Note For most video images, To print the currently displayed image, press the Print button on the TV panel or remote freezing the display in the control.
  • Page 72: Changing The Capture Settings

    Changing the Capture Settings If you’re freezing images containing text or images from a DVD player that uses progressive output, you may get better results by changing the capture method, as described below. Press the Freeze button. Press Select d to highlight Capture settings and press Enter. You see the Capture Settings screen: To change the aspect ratio of the image you’re freezing, press Enter.
  • Page 73 Note Press the POP button on the remote control. The image from the first source appears on If you’re watching a TV the left and the image from the second source appears on the right. station and have no second video source running, the next TV channel is automatically selected as the second...
  • Page 74: Using Channel Zapping

    Using Channel Zapping Channel zapping lets you get a quick look at programs broadcast on up to seven additional channels while you’re watching a TV program on an eighth channel. If you see a different channel that you want to watch, you can make it your main program. To use channel zapping, you must be using the jumper cable that connects the ANT 2 and Note RF Output ports.
  • Page 75: Zapping Channels

    Zapping Channels The first channel you select in channel zapping is the main channel. You’ll be able to hear the audio only from this channel, so select the channel you’d like to listen to first. Enter Press the POP button on the remote control. You see the POP (Picture-Outside-Picture) TV/Video Mute Favorite...
  • Page 76: Selecting Closed Caption Display

    Selecting Closed Caption Display You can turn on closed caption display so you can read dialogue or station information transmitted along with certain programs. You can also turn on an option that displays closed captions whenever you press the Mute button on the remote control. That way, you won’t miss any dialogue when you’ve muted the sound.
  • Page 77: Automatically Shutting Off The Tv

    Automatically Shutting Off the TV Power STB1 STB2 VCR DVD You can set up the TV to shut off automatically in case you fall asleep or want to control how PAUSE SKIP long it stays on. You can set the TV to go into “sleep” mode after 30, 60, or 90 minutes or you STOP PLAY can set it to turn off automatically after 30 minutes if it receives no signal input.
  • Page 78: Viewing, Printing, And Saving Photos

    Viewing, Printing, and Saving Photos You can use the digital photo card slots and printer built into your TV, and the external CD-R/RW drive, to view, print, and save digital photos, as described in these sections: • “Viewing Photos on a Digital Photo Card or CD” below •...
  • Page 79 • The photo files must contain a time stamp, so the slide show can display the files in time Note The photo viewer cannot stamp order. display, enlarge, or print TIF images. You see only the • The photo files should contain thumbnail data, such as that included in Exif format icon on the viewer JPEG files, to speed up display of the files in the photo viewer.
  • Page 80 After a few seconds, the Photo screen appears. It displays the photos on your card and Note If the photo viewer doesn’t outlines the first one in gold: come up automatically, press the Photo View Selected photo button on the TV panel or remote control.
  • Page 81: Compatible Photos And File Structure (Cd)

    Compatible Photos and File Structure (CD) If you create a CD-R/RW of your photos using a computer, make sure that you use the file structure and naming conventions defined in the DCF standard so the photo viewer can display your photos. Your CD-R/RW must contain folders and files using the following structure and format: •...
  • Page 82 Place your CD-R/RW on the tray with the label side facing up. Make sure the disc lays flat in the tray. Caution Always use the eject button to open and close the tray. Pushing in the tray may damage the drive and your disc.
  • Page 83 Press Select d to highlight CD-R/RW (if necessary) and press Enter. You see the CD folders in the Photo View screen: Note If you don’t see your folders, your drive may not be ready. Wait a moment and repeat step 6. If you still don’t see your folders, your disc may contain the wrong folder or...
  • Page 84: Enlarging And Rotating Photos

    Enlarging and Rotating Photos After inserting your photo card or CD, you can enlarge the photo view. You can also zoom in on parts of the photo or rotate it so you can view it correctly. The rotated position is retained Power STB1 STB2 VCR DVD...
  • Page 85: Viewing A Slide Show

    Viewing a Slide Show Note To move between the You can view your photos automatically, for a few seconds each, by running a slide show. You Menu and Slide Show sides can view all the photos or just selected ones. of the screen, just press Menu.
  • Page 86 To select or deselect a photo, press Prev. <, Next >, Select d, or Select u to highlight it, then press Enter. (A checkmark appears if the photo is selected.) When you’re ready to run the slide show, press the 2 button, then press Enter to select View Slide Show.
  • Page 87: Printing Photos

    You can purchase Photo Printing Packet number V13H151010 containing 50 sheets of paper and an ink cassette from your dealer or Epson. Call (800) 873-7766 or visit the Epson Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.
  • Page 88 Grasp the paper cassette and pull it all the way out of the printer. Open the paper cassette lid. Viewing, Printing, and Saving Photos...
  • Page 89 You can load up to 20 sheets of paper. Position the paper with the shiny side face up, with Caution Don’t remove the the wide bordered edge facing the hinge of the cassette, and the narrow bordered end perforated borders on the facing the open end of the cassette.
  • Page 90: Selecting A Photo And Printing It

    Slide the cassette into its slot, open end first. Push it in until it clicks into place. Close the printer cover. Selecting a Photo and Printing It Caution Don’t remove a card from You can print one photo at a time from a digital photo card or CD-R/RW. the slot while you’re printing or you may If you haven’t yet inserted your photo card or CD, insert it.
  • Page 91 Press the Print button on the TV panel or remote control. You see the Print Settings Power STB1 STB2 VCR DVD screen: PAUSE SKIP STOP PLAY Photo View Freeze Print Print Menu Exit Select Photo Zoom Prev. Next Rotate Enter Select Enter TV/Video...
  • Page 92: Monitoring Or Cancelling Your Print Jobs

    Monitoring or Cancelling Your Print Jobs Once you send a photo for printing, you can monitor its progress or cancel it. Press the 4 button. (Or press Menu, press Select d to highlight Print Monitor, and press Enter.) The Print Monitor menu opens. To monitor your print jobs, press Enter to choose Select Print Job.
  • Page 93: Saving Photos To Cd

    Cancelling an Individual Print Job Press Prev. <, Next >, Select d, or Select u to highlight the job and press Enter. You see the Printing or Waiting screen: Press Select u to highlight Cancel and press Enter. (If the print job has finished before you could cancel it, press Select d to highlight Exit and press Enter.) Select Yes on the next screen.
  • Page 94: Inserting A Cd-R/Rw

    Inserting a CD-R/RW Press the eject button on the drive to open the tray. Place a new, blank CD-R/RW disc on the tray with the label side facing up. Make sure the disc lays flat in the tray. Caution Always use the eject button to open and close the tray.
  • Page 95 You see a writing confirmation message while your photos are written to the CD and the Caution Don’t eject a disc, remove drive light flashes. When it’s finished, the CD tray opens and you see a completion a digital photo card, or message.
  • Page 96: Caring For The Tv

    Caring For the TV To keep your TV clean and operating correctly, or to move it to another location, follow the steps in these sections: • “Cleaning the TV” below • “Cleaning the Air Filter” below • “Replacing the TV Projection Lamp” on page 97 •...
  • Page 97 Use a small, hand-held vacuum to remove dust from both sides of the vent cover. To replace the vent cover, insert the tabs on the back into the right side of the vent opening. Then press in the left side of the vent cover. Caring For the TV...
  • Page 98: Replacing The Tv Projection Lamp

    You can purchase replacement lamp number V13H010R02 from your dealer or Epson. Call see if lamp replacement would help before (800) 873-7766 or visit the Epson Store at www.epsonstore.com (U.S. sales only). In Canada, replacing the lamp please call (800) 463-7766 for dealer referral unnecessarily.
  • Page 99: Lamp Replacement Precautions

    Lamp Replacement Precautions • Never touch the projection lamp immediately after turning off the TV or you could be burned.Wait at least 30 minutes after turning off the TV to let the lamp cool down completely. • If the lamp has broken, handle the shards carefully to avoid injury. •...
  • Page 100 On the front of the TV, push in the latch on the lamp cover, then pull off the cover and set it aside. Use the screwdriver that came with the replacement lamp to loosen the two screws in the Caution corners of the lamp housing.
  • Page 101 Position the new lamp as shown below. Then slide it carefully into the lamp slot until it stops. Tighten the screws in the corners of the lamp housing. Insert the tabs on the lamp cover into the right side of the opening. Then push in the left side to close the cover.
  • Page 102: Replacing The Printer Ink Cassette

    Make sure you have a new ink cassette before you begin. You can purchase Photo Printing Packet number V13H151010 containing 50 sheets of paper and an ink cassette from your dealer or Epson. Call (800) 873-7766 or visit the Epson Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.
  • Page 103 Flip down the printer lock cover. Turn the printer lock counterclockwise to loosen it. It spins freely when it is unlocked. Caring For the TV...
  • Page 104: Removing And Replacing The Ink Cassette

    Grasp the printer handle and pull the printer out as far as it goes. Removing and Replacing the Ink Cassette Pull open the ink cover on the side of the printer. Caring For the TV...
  • Page 105 Lift up the ink cassette latch, then carefully pull out the cassette. Remove the new cassette from its package. Then remove the red paper strip from the end. Caution Position the cassette as shown below. Then carefully align the cassette and its ribbon with If the ink ribbon catches in with the cassette slot.
  • Page 106 Once it is aligned, gently push the cassette into the slot until it clicks into place beneath Caution the latch. You must align the cassette and its ribbon with the slot or you will damage it when you slide it in. Flip up the ink cover and push it closed.
  • Page 107: Sliding The Printer Back In

    Sliding the Printer Back In Slide in the printer until it stops. If the printer catches on the opened printer door beneath it, gently hold the cover down and out of the way as you slide the printer in. Push in on the printer lock as you turn it clockwise to tighten it. If it doesn’t tighten, push the printer in further and try again.
  • Page 108: Moving Or Transporting The Tv

    Moving or Transporting the TV When moving the TV, have two people grasp the TV as shown below. Lift the TV using the WARNING The TV is very heavy. Two handles on the back and the top of the TV frame in the front. people are required to lift or move the TV to avoid injury.
  • Page 109 Caring For the TV...
  • Page 110: Solving Problems

    TV and that none of the ventilation slots are obstructed. If necessary, clean the TV’s air filter, as described on page 95. Then turn the TV back on. If it continues to overheat, contact Epson as described on page 121.
  • Page 111 TV, plug it back in, Power and press the button to turn on the TV. If the error persists, contact Epson as described on page 121. Orange High temperature warning The TV is overheating and the lamp is turned off automatically.
  • Page 112 Internal error Power The TV has an internal problem. Press the button to turn off the TV and then unplug it. Contact Epson as described on page 121. Orange flashing Fan or temperature sensor error The cooling fan or temperature sensor has a problem. Press the Power button to turn off the TV and then unplug it.
  • Page 113: Basic Operation Problems

    Basic Operation Problems Problem Solution The power won’t come on. Make sure your electrical outlet is working and isn’t controlled by a switch or timer. Check that the power cord is connected securely. Power If the light is flashing orange, the TV is cooling down. When it stops flashing and lights orange, you can unplug it or press the Power button to turn it on.
  • Page 114: Sound Problems

    Check the equipment you connected to make sure you selected the correct settings for sending images to the TV. If the color is uneven in all the corners of the image, your TV may have an internal problem. Contact Epson for more information. Menu The picture is dark.
  • Page 115: Tv Reception Or Operation Problems

    TV Reception or Operation Problems Problem Solution TV reception is poor. Check your antenna, cable, or digital or satellite receiver connections. See page 16 for details. Weather conditions and interference from other nearby equipment may be affecting the picture quality. Turn off or relocate equipment such as hair dryers or microwave ovens, if possible.
  • Page 116: Problems Viewing Photos From Cards Or Discs

    77 (for cards) or page 80 (for CDs). Hardware problem. If you see an error code on the screen, write down the code number. Contact Epson as described on page 121. Printing is in progress. Solving Problems...
  • Page 117 If the on-screen message contains an error code, write down the code number and contact Epson as described on page 121. You just replaced the ink cassette, Make sure the printer is locked and the lock cover is closed, as but the printer is not working.
  • Page 118: Clearing A Paper Jam From The Back Of The Printer

    Clearing a Paper Jam From the Back of the Printer Press and release the printer cover latch to open the cover. Flip down the printer lock cover. Solving Problems...
  • Page 119 Turn the printer lock counterclockwise to loosen it. It spins freely when it is unlocked. Grasp the printer handle and pull the printer out as far as it goes. Solving Problems...
  • Page 120 Use a Phillips-head screwdriver with a shaft at least 6 inches long to remove the 2 screws securing the printer on each side, as shown below. Remove only the screws at the base of the long plastic channels on the sides of the printer that secure it to the guiderails below.
  • Page 121 Slide the printer back onto its guiderails and align the screws with the screw holes on each side. 10 Tighten the screws securely, but don’t over-tighten them. 11 Slide in the printer until it stops. If the printer catches on the opened printer door beneath it, gently hold the cover down and out of the way as you slide the printer in.
  • Page 122: Problems Saving Photos To A Cd-R/Rw

    Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included in your User’s Guide kit. This is the fastest way of speaking to a live representative, and it’s free. This service is available 6...
  • Page 123: Solving Problems

    Solving Problems...
  • Page 124: Specifications

    Specifications Note Television specifications are General listed here. Specifications for the ATSC/NTSC tuner are listed in the tuner Owner’s Projection system 3 LCD panel, 1 lens, rear projection Manual. Television system NTSC (American standard); 2 tuners Channel coverage VHF: 2 - 13 UHF: 14 - 69 CATV: 1 - 125 Screen and Display...
  • Page 125: Environmental

    Environmental Operating temperature 41 to 95 °F (5 to 35 °C) Storage temperature 14 to 140 °F (–10 to 60 °C) Operating humidity 20 to 80%, non-condensing Interfaces Input interfaces Video IN 4 total (3 in back, 1 in front), RCA-type; 1 V p-p, 75 ohms S-Video IN 4 total (3 in back, 1 in front), S-type;...
  • Page 126: Printer

    Printer Type Dye-sublimation thermal transfer printer Resolution 300 dpi (equivalent to 4896 dpi on an ink jet printer) Paper size 4 × 6 inches (10.2 × 15.2 cm) Paper capacity 20 sheets Print speed 110 seconds per sheet Options TV stand For LS47P1D: V12H003R03 For LS57P1D: V12H003R02 Replacement lamp...
  • Page 127 Specifications...
  • Page 128: Notices

    Epson for service diagnostic and repair procedures. For the television unit, Epson will provide on site service to repair or replace the Product, at Epson’s option, without charge for parts or labor. On-site service may not be available in all areas or all instances.
  • Page 129: Energy Star Compliance

    For warranty support, call the Epson Connection at (800) 637-7661 + PIN or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada, or write to: Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012. ENERGY STAR Compliance As an ENERGY STAR Partner, Epson has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
  • Page 130: Fcc Compliance Statement

    FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 131 Notices...
  • Page 132: Index

    Index Adding channels, 49 Cable TV Adjusting picture and sound, 63 to 68 cable box connection, 18 to 19 Air filter, cleaning, 95 to 96 cable box/VCR connection, 26 Antenna direct cable/VCR connection, 25 connecting, 17 direct connection, 17 grounding, 10 Cables satellite, 20 antenna, 17...
  • Page 133 cancelling writing to, 94 DCF format, 77 ejecting, 82, 94 Digital photo card file structure, 80 file structure, 77 to 78 folders, 82 inserting, 78 to 79 inserting in drive, 80 to 81 printing photos on, 86 to 92 printing photos on, 86 to 92 problems, 115 problems, 115 saving photos on CD, 92 to 94...
  • Page 134 Game Maintaining TV, 95 to 107 blocking console port, 59 to 61 Manual Program setting, 49 console cable connection, 30 Mechanical specifications, 123 Grounding, antenna, 10 Memory card, see Digital photo card Menu language, 42 to 43 Monitoring print jobs, 91 Moving TV, 107 Headphones MTS setting, 75...
  • Page 135 Picture quality adjusting, 63 to 65 Ratings, V-Chip, 58 to 59 problems, 112 to 113 Reception, TV, 114 Picture-Outside-Picture (POP), 71 to 72, 74 Remote control Playback setting, 85 ATSC tuner code, 36 POP button, 72, 74 batteries, inserting, 33 Position setting, 63 to 65 controlling other equipment, 36 to 40 Power...
  • Page 136 Speaker cover, 98, 101 adjusting picture and sound, 63 to 68 setting, 68 air filter, cleaning, 95 to 96 specifications, 123 caring for, 95 to 107 volume setting, 68 cleaning, 95 Specifications, 123 to 125 connecting cables, 14 to 32 Standard video dimensions, 123 camcorder connection, 31...
  • Page 137 V-Chip blocking, 55 to 59 Weight, TV, 123 Writing photos to CD-R/RW, 92 to 94 standard video connection, 24 standard video/cable box connection, 26 standard video/direct cable connection, 25 Zapping channels, 55, 73 to 74 standard video/satellite connection, 27 to 28 S-Video connection, 24 S-Video/cable box connection, 26 S-Video/direct cable connection, 25...
  • Page 138 Remote Control Power STB1 STB2 VCR DVD Power button Equipment switch Turns the TV on or off. See page 41. Selects equipment to operate with the remote PAUSE SKIP control. See pages 35 and 36. STOP PLAY Control buttons Photo View Let you control equipment such as a VCR or Photo View Freeze...
  • Page 139 For DVD, VCR, satellite, and other video and audio input devices that use component video. (Y 1, 2; PB 1, 2; PR 1, 2; and Audio L/R 1, 2) Serial For use only by your Epson servicer. EXT. I/F For an external CD-R/RW drive only. (USB interface)

This manual is also suitable for:

Livingstation ls57p1d

Table of Contents