Table of Contents
Advertisement
5
Use a Phillips-head screwdriver with a shaft at least 6 inches long to remove the 2 screws
securing the printer on each side, as shown below.
6
Lift up the front of the printer slightly and slide it forward off of its guiderails until you
can access the back of the printer.
7
Open the back door of the printer and pull out any paper jammed inside.
8
Close the back door.
Remove only the screws at the base of the
long plastic channels on the sides of the
printer that secure it to the guiderails below.
119
Solving Problems
Advertisement
Table of Contents
