Toshiba MMK-UP0271HP-E Installation Manual page 36

Adjustment of air direction
1. Using the remote controller switch, change the
up/down air direction by moving the horizontal
louver.
2. Adjust the right/left air direction by bending the
vertical grille inside of the air outlet port with
hands.
REQUIREMENT
Do not touch the horizontal louver directly with
hands; otherwise a trouble may be caused.
For handling of the horizontal louver, refer to
"Owner's Manual" attached to the outdoor unit.
Group control
• The wired remote controller only can control a
group control. The wireless remote controller is
unavailable for this control.
• For cabling procedure and cables of the
individual line (Identical refrigerant line) system,
refer to "Electrical connection" in this Manual.
• Cabling between indoor units in a group is
performed in the following procedure.
Connect the indoor units by connecting the
remote controller inter-unit cables from the
remote controller terminal blocks (A, B) of the
indoor unit connected with a remote controller
to the remote controller terminal blocks (A, B) of
the other indoor unit. (Non-polarity)
• For address setup, refer to the Installation
Manual attached to the outdoor unit.
NOTE
Network adapter (Model TCB-PCNT20E) can not
connect to this High Wall type air conditioner.
35-EN
‒ 35 ‒
Installation Manual