Table of Contents
Advertisement
Page 14
11.2 Status Pages
Status pages are available on the main display while in the STATUS mode. To activate the STATUS mode, press the [
key. The Status LED illuminates to confirm your selection. This firmware update includes the following new Status pages.
11.2.1 TIMES STATUS PAGE
The TIMES status page has multiple running counters showing the different DXD
times available as well as an offset:
-
System Time: Main DXD TOD clock
-
RT Clock: continuously running internal back-up clock
-
Grandmaster: time from the external PTP Grandmaster
-
GPS: GPS Time from the DXD/GPS receiver
-
TOD-GM Ofst: indicates the offset between the internal Time Of Day clock
and the Grandmaster in µsec.
Additional times may appear on this page such as Time Code based on the installed options.
11.2.2 GPS RECEIVER STATUS PAGE
The GPS RECEIVER status page displays the following information:
-
Antenna
-
Network: Indicates the number of satellites available for each
constellation
-
Frequency Mode (LOCK / FREERUN 0 / FREERUN 1 / PULLIN 0 /
PULLIN 1 / WARMUP)
-
Quality (0000-9999 - Lower value is better)
-
GPS Leap Seconds (the current number of GPS leap seconds is 18)
11.2.3 PTP STATUS PAGE
A PTP status page gives detailed information on PTP. This page will be available in a future firmware revision.
-
Detect (Normal / Shorted / Open / No voltage)
-
Environment (Open sky / Semi shielding / High shielding / No
position fix)
-
GPS
-
SBAS
-
OZSS L1C/A
-
QZSS L1S
-
GLONASS
-
Gallileo
This page does not appear if the DXD/GPS card is not installed.
DXD/PTP/GPS User Manual (rev 2.10)
Note: Display has been enlarged to show all scrolling options
]
STATUS
Advertisement
Table of Contents
