CDVI BO800RN Installation Manual page 3

iNstaLLatiON MaNUaL
BO800RN
Retrofit housing and retrofit handles
Product Details
DEsCRiPtiON
Number of 400Kg
magnets
Lock section with cover
Architectural handle
with fixing cover
End caps for handle
End caps for lock section
RaL colour (option)
Finishes
Description
Number of 400Kg magnets
Lock section with cover
Architectural handle with
fixing cover
End caps for handle
End caps for lock section
RaL colour (option)
Cut-to-length service
provided (option)
Magnets & armatures supplied
non-mounted (specify)
Monitored (Option)
2] iNFORMatiON & RECOMMENDatiONs
information
The electromagnets are pre-fitted within the lock section.
The armature plates are pre-fitted within the architectural
handle. Both sections are supplied with end caps.
Power Considerations
The handle is designed to house electromagnets with
a holding force of 400Kg each. These units can be
supplied by either 12Vdc or 24Vdc depending upon your
preferred choice. The current required depends on the
amount of electromagnetic locks, and the voltage chosen
– please see Technical Specification, and ensure you
have allocated sufficient power to correct performance.
For example, the BO800RN2.5m (2.5m housing with
2 magnetic locks) would require:
- PSU12/2 or ARD2/12 at 12Vdc
- PSU24/1 or ARD24 at 24Vdc.
BO800RN
REtROFit HOUsiNG
2
1
1
2
2
standard
(Ref. Product) (Ref. Product)
aL CH
Anodised Anodised
aluminium (SAA) champagne
2
-
-
PBO400RN40
REtROFit HaNDLE
1
1
1
2
2
(Ref. Product)
9005
RAL
Black
2 2
- -
- -
General advice
The 2 parts of the architectural housing are designed
to be surface mounted on the door and frame, where
they should be parallel when the door is closed. If there
is a rebate, then it will be necessary to pack out the
lower part.
Wiring
Plan your cable routes before commencing installation.
We recommend a maximum distance of 10m from the
power supply to the electromagnetic locks (to prevent
volt drop). If the distance is greater, then make sure
you have increased the cross section of the cable to
compensate.
PBO800RN60
REtROFit HaNDLE
2
1
1
2
2
(Ref. Product) (Ref. Product)
9010 Bt
RAL
Untreated
White
2 2
-
-
cdvigroup.com
EN
3