Table of Contents
Advertisement
■ How to customize
Operations can be performed when the select
P
lever is in the
switch is in the ON position while the vehicle
is parked. However, the Cruise Control Accel-
eration Characteristics and warning volume
can be changed, even while you are driving.
1. Pull the
/
display the change settings screen.
Pull and hold the
change to the settings screen.
2. Pull the
/
"EyeSight", "Screen Settings" or "Warning
Volume", and pull the
to confirm.
The system will then switch to the settings
screen.
Operate the following switches according to
the display on the screen.
• Select:
(Return) switch/
(Send) switch
• Confirm:
(Info)/SET switch
When "Go Back" is selected, the system will return to the screen 1 level above
the current one.
●
Driver Assist Indicator
The Driver Assist indicator can be activated (On) or deactivated (Off).
●
Warning Volume
The volume can be set to Max/Mid/Min.
When on the Warning Volume settings screen, if the volume is selected with the
switch, 3 short beeps will sound.
position and the ignition
switch toward you to
(Info)/SET switch to
switch toward you, select
(Info)/SET switch
NOTE
Change settings screen
A
Customizing functions
Settings screen
Settings
Screen Setting
Select
Select
Enter
Enter
Select
Select
S03872
/
113
Advertisement
Table of Contents
