Key Operation; Main Setting Screen - C-LOGIC 410-TC Instruction Manual

Key operation

No. Symbol
A
Rotary button
B
Rotary button
C
Rotary button
D

Main setting screen

Mode Explanation
Automatic
A short press of the rotary button enables the automatic mode, displaying the
mode
icon.
Other short press of the rotary button enables the manual mode, displaying the
the button clockwise (increasing the temperature) or anticlockwise (decreasing
the temperature). When room temperature is lower than setting temperature,
Manual mode
the heating contact will be closed and the cooling contact will be opened (
is displayed) and when room temperature is higher than setting temperature, the
heating contact will be opened and the cooling contact will be closed (
disappear)
Under automatic mode and unlock state, when rotating the button to adjust the
temperature, it will enter into temporary manual mode. This temporary mode
Temporary
works to next interval when it will return to the automatic mode. If you want
manual mode
to return to manual or automatic mode, please press the button once or twice
respectively
Press the rotary button for 3 second for entering in the setting screen. Rotates the button to select
the required icon and press the button to confi rm the access to that setting.
Mode Explanation
Frost
After entering into setting screen, rotate rotary button to select
protection
press the key in order to enable the frost protection mode.
mode
The default temperature under the frost protection mode is 5ºC. It protects pipes
from frost.
Description
Clockwise rotation for increasing the value
1. 1. Under turn on state, a short press switches between manual
and automatic mode.
2. 2. Under turn on state, a long press (3 seconds) allows to enter in
the setting screen.
3. 3. In other screens, it acts as confi rm key.
Anticlockwise rotation for decreasing the value
Short press for power on / off.
Long press (3 seconds) for screen locking or unlocking.
icon. Under this mode, it is possible to adjust the set temperature by rotating
10
icon
icon will
icon and