Checking The Connection To Mindsphere - Siemens SITRANS IQ Operating Instructions Manual

Parameter assignment/addressing
7.3 Establishing a connection to MindSphere
6. Activate the connection via the slider
7. Click the "Save Changes"
Result
In MindSphere, you can now also use the "Agent Diagnostic" to check whether the connection
is set up. (Page 56)
See also
Getting Connected to MindSphere
getting-connected-en.pdf)
MindSphere documentation area (http://documentation.mindsphere.io)
7.3.1

Checking the connection to MindSphere

Introduction
In MindSphere, you can use the "Agent Diagnostic" to check whether a connection to the
SITRANS CC240 web server exists.
The data is uploaded about every 4 minutes from the SITRANS CC240 web server to MindSphere.
Procedure
1. Open MindSphere.
2. Call up the Agent Diagnostic.
3. Click on "Setup" and add a new monitor.
56
⑤
to the right.
⑥
button.
(https://documentation.mindsphere.io/resources/pdf/
SITRANS CC240 and SITRANS MX300
Operating Instructions, 06/2021, A5E47280695-AB