Defrosting The Freezer Compartment; Defrosting The Refrigerator Compartment; Replacing The Light - Whirlpool WBC3546 A+NFCW Product Sheet

CLEANING
Press the Stand-by button, which allows you to switch off
the appliance.
Remember that this operation does not disconnect the
appliance from the power supply.
The refrigerator / freezer compartment can now be
emptied and cleaned.

DEFROSTING THE FREEZER COMPARTMENT

No Frost freezers provide chilled air circulation around
the storage areas and prevent the formation of ice,
thereby completely eliminating the need for defrosting.
Frozen items don't stick to the walls, labeling stays legible
and storage space remains neat and clear.
In combination with
sensor, but directs the cooling power exactly where it is
needed, optimizing energy efficiency.
DEFROSTING THE REFRIGERATOR
COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase is
in progress. The defrost water is automatically run into a
drain hole and collected in a container, where it
evaporates.
D GB F
PRODUCT SHEET
, not only does it control the
NL E P I GR

REPLACING THE LIGHT

BULB's LIGHTING
Always disconnect the
refrigerator from the
power supply before
replacing any light bulb.
If the inside light is not working, it is necessary to:
1. Remove the light cover: put the fingers into the side
ventilation holes (1), stretch the cover gently and
move it upwards.
2. Check the bulb. If necessary unscrew the broken bulb
and replace it with the new one (use maximum 15W
bulb).
3. Put on the light cover.
Do not leave the bulb uncovered.
LED's LIGHTING
If the inside LED light is
not working, it must be
replace by service.
S N DK FIN PL CZ SK H RUS BG
GB
RO