Em-Trak B900 Series User Manual

Em-Trak B900 Series User Manual

Class b ais transceiver
Hide thumbs Also See for B900 Series:

Advertisement

B900 SERIES USER MANUAL
Class B AIS Transceiver
Applicable models: B921 / B922 / B923 / B924 / B951 / B952 / B953 / B954

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B900 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Em-Trak B900 Series

  • Page 1 B900 SERIES USER MANUAL Class B AIS Transceiver Applicable models: B921 / B922 / B923 / B924 / B951 / B952 / B953 / B954...
  • Page 2 We constantly strive to achieve the highest possible quality standards, should you encounter any problems with this product, please contact your dealer or support@em-trak.com who will be pleased to offer any assistance you require.
  • Page 3: Table Of Contents

    Table of contents Table of contents Regulatory notices ........3 Safety warnings ................3 General notices................3 About your AIS transceiver .......8 Overview ..................8 B900 Product range..............10 What's in the box? ................12 Support and warranty ..............12 Configuration tools...............13 Installation ............14 Summary ..................14 Antennas ..................16 Power ....................19 Location and fixing of the transceiver........22 Configuration .................25...
  • Page 4 List of figures and tables List of figures and tables Figure 1 AIS transceiver overview ..........8 Figure 2 Transceiver dimensions ........... 9 Figure 3 FLEXI-FIT bracket.............. 9 Table 1 Product variants ..............10 Figure 4 Items included with the product ........12 Figure 5 Typical installation configuration ........
  • Page 5: Regulatory Notices

    Regulatory notices Regulatory notices When reading this manual please pay attention to warnings marked with the warning triangle shown on the left. These are important messages for safety, installation and usage of the product. Safety warnings This equipment must be installed in accordance with the instructions provided in this manual.
  • Page 6 Regulatory notices The accuracy of a GPS position fix is variable and is affected by factors such as the antenna positioning, how many satellites are used to determine a position and how long satellite information has been received for. The term GPS will be used in this manual to mean all and any GNSS systems.
  • Page 7 Regulatory notices 1.2.4 Disposal of this product and packaging Please dispose of the AIS transceiver in accordance with the European WEEE Directive or with the applicable local regulations for disposal of electrical equipment. Every effort has been made to ensure the packaging for this product is recyclable.
  • Page 8 AIS with their vessel data. To do so is a violation of the rules of the United States Coast Guard (USCG). This must be done by a competent installer, such as em-trak, an em-trak dealer or competent marine electronics professional. If your transceiver has not been pre-configured for you please refer to your dealer or contact support@em-trak.com for advice on how to have the...
  • Page 9 Regulatory notices no extra cost, if you are purchasing from one of our dealers, then they will do it for you. In the United States of America, the MMSI and static data must only be entered by a competent installer. The end user of the equipment is not authorised to enter their own vessel data.
  • Page 10: About Your Ais Transceiver

    About your AIS transceiver 2 About your AIS transceiver 2.1 Overview Internal GPS antenna location LED indicators Micro USB port Mounting clip *GPS antenna VHF antenna Power NMEA and data 2000 VHF radio Mounting Locking (Applicable to bracket screw B923, B924, B953 and B954) * GPS receiver &...
  • Page 11 About your AIS transceiver 150 mm 150 mm 43 mm Figure 2 Transceiver dimensions 71 mm 54 mm 61 mm 17 mm Figure 3 FLEXI-FIT bracket Page 9...
  • Page 12: B900 Product Range

    About your AIS transceiver 2.2 B900 Product range The B900 Series provides multiple feature options. The variants are listed in Table 1 and the main features are detailed below. B921 B922 B923 B924 B951 B952 B953 B954   ...
  • Page 13 About your AIS transceiver 2.2.1 Main features •Integrated WiFi & Bluetooth so you can connect wirelessly to all your devices. Applicable to B922/B924/B952/B954. •Integrated VHF antenna splitter so you can use your existing VHF radio antenna. Applicable to B923/B924/B953/B954. •Integrated high performance GPS receiver and antenna so that an external GPS antenna is optional.
  • Page 14: What's In The Box

    About your AIS transceiver 2.3 What's in the box? Figure 4 shows the items included with your B900 Series purchase. If any of the items are not present please contact your dealer or support@em-trak.com. Class B AIS transceiver 1 metre...
  • Page 15: Configuration Tools

    Support department (24/7) at support@em-trak.com and one of our experts will work with you to instantly resolve your issue or arrange the repair or replacement of your em-trak product. The warranty is invalidated if the product has been incorrectly used, damaged or tampered.
  • Page 16: Installation

    If after reading this manual you are unsure about any element of the installation process please contact your dealer or support@em-trak.com for advice. VHF radio GPS antenna...
  • Page 17 Installation In addition to the items supplied, the following may also be required for your installation: •VHF antenna and cable - this is required for your transceiver to receive and transmit. A variant with an integrated splitter (B923/B924/B953/B954) can use an existing VHF antenna providing it is tuned to operate across the frequency range 156MHz to 162MHz.
  • Page 18: Antennas

    Installation 3.2 Antennas 3.2.1 VHF antenna Connection to a suitable VHF antenna will be required for the transceiver to receive and transmit. Transceiver variants (B921/B922/B951/B952) do not have an integrated splitter and will require a dedicated VHF antenna tuned to the AIS channels at 162MHz. Integrated splitter variants (B923/B924/B953/B954) will require a VHF antenna tuned to operate across the frequency range 156MHz to 162MHz.
  • Page 19 If your installation location is deep inside your boat where the GPS antenna will not be able to receive satellite signals you will need an external GPS antenna. We recommend the em-trak GPS100, which is available for purchase from www.em-trak.com.
  • Page 20 Installation Please note the following guidelines when installing an external GPS antenna. •You will require a 1" (inch) 14 TPI threaded mount if you choose to pole mount the GPS antenna. •The GPS antenna is also supplied with a gasket/thumb nuts/ studs so it can be deck mounted.
  • Page 21: Power

    Installation 3.3 Power 3.3.1 Connecting the power and data cable A power and data cable is supplied with the product to provide connections for power, two NMEA 0183 data ports and the optional silent mode switch. The cable has a moulded connector at one end which should be connected to the 12 pin connector on the unit.
  • Page 22 Installation Wire Description Function colour Power in + Power supply connections Black Power in - Light Switch connection External switch connections Green for silent mode Orange Switch connection Brown NMEA 0183 port 1 TX+ High speed NMEA 0183 output (38,400baud) Blue NMEA 0183 port 1TX- intended for connection to...
  • Page 23 Installation It is recommended that crimped and soldered lugs are used to connect the AIS transceiver to the power source using a suitable circuit breaker and/or 3A fuse block. The red and black wires as shown in Figure 8 need to be connected as follows: 1.
  • Page 24: Location And Fixing Of The Transceiver

    Installation 3.4 Location and fixing of the transceiver Please note the following guidelines when selecting an installation location: •The ambient temperature around the transceiver should be maintained between -25°C and +55°C. •The transceiver should not be located in a flammable or hazardous atmosphere, such as in an engine room or near to fuel tanks.
  • Page 25 Installation 150 mm 150 mm 43 mm Figure 10 AIS transceiver dimensions 71 mm 54 mm 61 mm 17 mm Figure 11 FLEXI-FIT bracket Page 23...
  • Page 26 Installation The B900 Series uses a simple bracket system to make installation as easy as possible. Use the supplied bracket template to locate the desired position of the transceiver and simply screw or stick (adhesive pads are also supplied) the bracket to your vessel and then click the transceiver into the bracket.
  • Page 27: Configuration

    Installation 3.5 Configuration Your transceiver will only be able to transmit once it has been configured with appropriate vessel data. 3.5.1 Switching on your AIS transceiver for the first time When power is applied to the transceiver for the first time all the status LED indicators will flash briefly, leaving only the amber and red LED indicators illuminated.
  • Page 28: Introduction To Proais2

    Smartphone Figure 14 Configuration using your smartphone. 3.6 Introduction to proAIS2 proAIS2 is available for download from www.em-trak.com/ installation and allows you to configure your transceiver using a PC or laptop over USB. This configuration tool can be used to configure your vessel data,...
  • Page 29 The vessel MMSI can only be configured once using proAIS2. If you need to change the MMSI for any reason, please contact your dealer or support@em-trak.com and provide the product serial number, current MMSI number and new MMSI number. Page 27...
  • Page 30 Installation 3.6.3 WiFi configuration using proAIS2 This section applies to WiFi & Bluetooth enabled variants (B922, B924, B952 and B954). The WiFi interface can be configured using the WiFi tab. 3.6.4 Access point mode This mode enables your transceiver to create its own network. The following parameters can be configured: •...
  • Page 31 Installation 3.6.5 Station mode This mode enables your transceiver to connect to an existing network as a client. The following parameters can be configured: • Host name • SSID • Password • DHCP / Fixed IP address, Subnet, Gateway • Port number •...
  • Page 32 GPS antenna performance, view details on surrounding vessels, and monitor and diagnose the performance of the transceiver. Further information on how to use CONNECT-AIS can be found in the FAQ section for this product - https://em-trak.com/installation/. Page 30...
  • Page 33: Connectivity

    Installation 3.7 Connectivity 3.7.1 Connecting to an NMEA 2000 network The transceiver can be connected to an existing NMEA 2000 network to provide AIS and position data to other connected devices such as chartplotters, instruments, sensors, etc. Connection is made by a Micro-C drop cable to the existing NMEA 2000 network T-piece.
  • Page 34 Installation configuration tools if required. Four wires are provided for a bi- directional connection, and are colour coded as shown in Figure 17. Other manufacturers may use different signal names, however the following general guidelines will apply when connecting to other equipment: •positive signals should be connected together •negative signals should be connected together...
  • Page 35 Installation Power in + Black Power in – Light green Switch connection Orange Switch connection Brown Transmit + Blue Transmit – NMEA 0183 White Port 1 Receive + 38,400baud Green (chart plotter) Receive – Purple Transmit + Pink Transmit – NMEA 0183 Grey Port 2...
  • Page 36 PC or laptop. This item is not supplied but is widely available for purchase. When selecting a USB cable, please ensure it provides both power and data. Some USB cables provide power only, and are used for charging devices. The B900 Series requires USB data for communications. Page 34...
  • Page 37 (Windows 7 and up). These are installed automatically by using either Windows Update or when installing proAIS2. proAIS2 is available for download from www.em-trak.com/installation. USB drivers are typically not required for macOS operating systems. Once your transceiver is communicating with your PC or laptop you can view the received AIS data using a compatible navigation application.
  • Page 38 IP address and port number. This is also displayed in the WiFi tab of proAIS2 and can be changed if required. Please contact support@em-trak.com if you require any assistance with the wireless configuration of your transceiver. Page 36...
  • Page 39: Operation

    Operation 4 Operation 4.1 LED indicators 4.1.1 Using the AIS transceiver Once the unit has been configured it is ready for use. Providing other vessels installed with transceivers are within radio range of your vessel you will see their details appear on the display devices that you have connected to your transceiver.
  • Page 40 Blue LED indicator Indicates that silent mode is enabled. Silent mode is a feature of the B900 Series that ceases the transmissions from your own vessel, whilst the reception of other vessel position reports continue. You can activate this using the configuration tools or by activating the toggle switch as detailed in Section 4.2.
  • Page 41: Silent Mode

    Operation Amber LED indicator If the LED indicator is flashing it means it is attempting to get a GPS fix. The GPS antenna status can be confirmed using the configuration tools. If the LED indicator is solid it means that the AIS transceiver is not transmitting.
  • Page 42 Operation Do not connect a voltage source across the switch inputs as this may damage the transceiver. Power in + Black Power in – Light green Switch connection Orange Switch connection Brown Transmit + Blue Transmit – NMEA 0183 White Port 1 Receive + Green...
  • Page 43: Pgn Table

    Operation 4.3 PGN table PGN’s are useful for understanding the detailed information that your transceiver receives and transmits on an NMEA 2000 network. The PGN’s listed in Table 4 are supported by the transceiver. There are no unused fields. PGN No. Title in NMEA database Usage NMEA 0183...
  • Page 44 Operation 129029 GNSS Position data 129038 AIS Class A Position Report VDM/VDO 129039 AIS Class B Position Report VDM/VDO 129040 AIS Class B Extended Position VDM/VDO Report 129041 AIS AtoN Report VDM/VDO 129793 AIS UTC and Date Report VDM/VDO 129794 AIS Class A Static and Voyage VDM/VDO Related Data...
  • Page 45: Troubleshooting

    Troubleshooting 5 Troubleshooting Issue Possible cause and remedy • Check that the power supply is connected No LED correctly. indicators are illuminated • Check that the power supply is a 12V or 24V supply. The red error There may be a problem with the VHF LED indicator is antenna system.
  • Page 46 Troubleshooting • Check that the unit is configured with a The red 'error' valid MMSI number. This can be confirmed LED indicator is using the Configuration tools. illuminated • Check that the GPS antenna has a stable position fix. This can be confirmed using the configuration tools.
  • Page 47 • Check that you're not attempting to use Bluetooth with an Apple device. Table 5 Troubleshooting If the guidance given above does not rectify the problem you are experiencing, please contact your dealer or support@em-trak.com for further assistance. Page 45...
  • Page 48: Specifications

    Specifications 6 Specifications Parameter Value Dimensions 149 x 118 x 47 mm (L x W x H) Weight Transceiver only variants 320g Transceiver with splitter variants 345g Input voltage DC 12 - 24V (9.6 - 31.2V maximum) Average B921/B951: 135mA / 1.65W at 12V power B922/B952: 170mA / 2.05W at 12V consumption...
  • Page 49 Specifications Connectors VHF antenna connector (SO-239) VHF radio connector (SO-239) - only applicable to splitter variants B923/B924/B953/B954 External GPS antenna connector (TNC) NMEA 2000 connector (Micro-C) Power/NMEA 0183/silent mode (12 way) USB micro connector Transmitter x 1 Transceiver Receiver x 2 (Receivers time shared between AIS and DSC) Frequency: 156.025 to 162.025 MHz in 25 kHz steps...
  • Page 50 Specifications Receiver Sensitivity better than -107dBm at 20% PER Performance Co-channel 10dB Adjacent channel 70dB IMD 65dB Blocking 86dB Environmental Weather and waterproof to IPx7 & IPx6 Operating temperature: -25ºC to +55ºC Tested to IEC 60945 'Exposed' category LED indicators Power, TX status, error, silent mode status Table 6 Specifications Page 48...
  • Page 51: About Ais

    About AIS 7 About AIS The marine Automatic Identification System (AIS) is a location and vessel information reporting system. It allows vessels equipped with AIS to automatically and dynamically share and regularly update their position, speed, course and other information such as vessel identity with similarly equipped vessels.
  • Page 52: Static And Dynamic Vessel Data

    About AIS AtoN’s and AIS base stations but do not transmit any information about the vessel on which they are installed. 7.1 Static and dynamic vessel data There are two categories of information transmitted by a transceiver: static and dynamic data. The vessel's dynamic data, which includes location, speed over ground (SOG) and course over ground (COG), is calculated automatically using the integrated GPS receiver.
  • Page 53: List Of Abbreviations

    List of abbreviations List of abbreviations Automatic Identification System Access Point (Relating to WiFi behaviour) AtoN AIS Aid to Navigation European Declaration of Conformity Course Over Ground Common (electrical) Carrier Sense Direct Current DHCP Dynamic Host Configuration Protocol Digital Selective Calling Federal Communications Committee Geographic position - Latitude/longitude message GLONASS...
  • Page 54 List of abbreviations Parameter Group Number Radio Equipment Directive Radio Frequency Recommended minimum specific GPS data message Rate of Turn Receive Self Organised Speed Over Ground SOLAS Safety of Life at Sea Safety Related Message TDMA Time Division Multiple Access True heading and status message Threaded Neill–Concelman (a type of connector) Threads per Inch...
  • Page 56 The em-trak B900 Series transceivers are an aid to navigation and must not be relied upon to provide accurate navigation information. AIS is not a replacement for vigilant human lookouts and other navigation aids such as RADAR. The performanceof the B900 series may be seriously impaired if not installed as instructed in the user manual, or due to other factors such as weather and or nearby transmitting devices.

This manual is also suitable for:

B921B922B923B924B951B952 ... Show all

Table of Contents

Save PDF