Table of Contents
Advertisement
6
7
8
9
10
1. Stick a small aluminum foil on
Main SHD
1. Assemble Rear Cover with Mid-
Frame
2. Follow the sequence to press on
Rear Cover to make it be
assembled with Mid-Frame tightly
1. Lock 4 screws on Rear Cover
To attach the monitor stand:
1. Insert the stand base blocks fully
into the stand slot
2. Lift the screw handle and turn the
screw clockwise
3. After fully tightening the screw,
fold the screw handle flat within
the recess
Attach the stand assembly to the
monitor:
1. Fit the two tabs on the upper part
of the stand to the groove on the
back of the monitor.
2. Press the stand down till it snaps
into place
- 13 -
Philips-
head
screwdriver
Torsion of
screw:
8.5±1.0Kg
Advertisement
Table of Contents
