Table of Contents
Advertisement
Coordinate
Allows you manually input GPS coordinates that will appear on image time stamps. This can be useful when
running multiple cameras in an area, especially in research scenarios.
On: Takes you to coordinate setting options.
Off: The default setting.
'
Field Scan
Allows you to capture images without requiring a trigger during a specified time period and interval.
For instance, it will take picture every 5 minutes between 8am and 5pm if that is your desired time
period.
On: Allows you to select two time periods within a 24‐hour period and the interval.
Off: The recommended default.
Flash Mode
Selects the shutter speed.
Note: These settings only affect the quality of your nighttime images.
Short Range: Recommended for subjects at less than 60'.
Fast Motion: Recommended for subjects moving quickly through the frame.
Advertisement
Table of Contents
